Abstract:Heat pipe cooled reactors(HPRs)have been considered as one of the most promising candidates for deep space and deep-sea missions due to their advantages of simple structure,high power density and high reliability,etc.To investigate the transi-ent characteristics of such heat pipe cooled reactors,including startup,shutdown,pow-er transients and accident conditions,it is necessary to develop suitable and efficient models for describing the core,the heat pipe and the power conversion system.Espe-cially,for the startup process,an accurate and efficient model for the simulation of high-temperature heat pipe startup from the frozen state is indispensable.In this study,two transient models based on the dusty gas model(DGM)were developed.The first model(model 1)solved the mass and momentum equations of vapor flow,while the second model(model 2)simplified the vapor flow as a 1D steady-state heat conduction problem using an equivalent network model.The models considered the evaporation/condensa-tion flux at the vapor/liquid interface using the kinetic theory of gases.The wick and wall were modeled using an improved network model,which took into account the phase transition of the working fluid in the wick.Different methods were used to solve these models in this paper.For the model considering the vapor flow,the finite-difference dis-cretization scheme and the SIMPLEC algorithm were used to solve the governing equa-tions.For the equivalent network model,a loosely coupled numerical method is employed.The solution of wick and wall equations was in a transient state,while the equivalent heat conduction equation of the vapor flow was solved in a steady state mode.The alternating direction implicit(ADI)was adopted to solve the equations for the wick and wall regions.The startup experiments of high-temperature heat pipes with different working fluids are simulated to validate the accuracy of these models.The results indi-cate that the simulation results agree well with the experimental data.Compared with the flat-front startup model,the temperature distribution calculated by model 2 is more accurate,and the description of startup is more plausible.Meanwhile,model 2 gives quite reasonable results although it is less accurate than the model 1.The calculation efficiency of the model 2 is significantly improved compared to model 1.Consequently,in the feasibility study stage of an HPR system,the simplified equivalent network model(model 2)with considering both accuracy and efficiency is suitable for the simulation of heat pipe startup.

A TRANSIENT AND STEADY-STATE NETWORK MODEL FORANNULAR-WICK HEAT PIPES IN CONTINUUM FLOW PATTERN

Numerical investigation on thermal behavior of high temperature heat pipe based on thermal resistance network model

An Improved Model of the Heat Pipe Based on the Network Method Applied on a Heat Pipe Cooled Reactor

Numerical Investigation of High-Temperature Heat Pipes with Different Wick Structures under Non-Uniform Heating Boundary Conditions

The development of high temperature heat-pipe transient model for system analysis of heat pipe cooled microreactor

Performance Analysis of Heat Pipe Radiator Unit for Space Nuclear Power Reactor

The Super Thermal Conductivity Model for High-Temperature Heat Pipe Applied to Heat Pipe Cooled Reactor

Transient Analysis of A Cylindrical Heat Pipe Considering Different Wick Structures

Transient Multidimensional Analysis of Nonconventional Heat Pipes With Uniform and Nonuniform Heat Distributions

Transient Study on Heat Transfer and Flow Performance of Alkali Metal Heat Pipe in Space Nuclear Powered Heat Pipe Radiator

A Simplified Model for High-temperature Heat Pipe Startup

Investigation of Neutronic and Thermal–electric Coupling Phenomenon in a 100 Kwe-Level Nuclear Silent Heat Pipe-Cooled Reactor

Numerical Study of the Thermal Performance of a Hydrogen Pulsating Heat Pipe

A Review of the Numerical Models for Heat and Mass Transfer in High-Temperature Heat Pipes

A two-phase three-field modeling framework for heat pipe application in nuclear reactors

Thermal-hydraulic analysis of the thermoelectric space reactor power system with a potassium heat pipe radiator

CFD Analysis on the Multiphase Flow of the Wickless Sodium Heat Pipe with Non-condensable Gas

Numerical Simulation of a Small High-Temperature Heat Pipe Cooled Reactor with CFD Methodology

CFD simulation based on film model of high temperature potassium heat pipe at different positions: Horizontal, vertical, and 45° inclined

Numerical investigation on the startup performance of high-temperature heat pipes for heat pipe cooled reactor application

Multi-physics Coupled Simulation on Steady-State and Transients of Heat Pipe Cooled Reactor System