Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Vacuum-Breakdown-Induced Needle-Shaped Ends of Multiwalled Carbon Nanotube Yarns and Their Field Emission Applications

Scaled fabrication of single-nanotube-tipped ends from carbon nanotube micro-yarns and their field emission applications.

Observations of Carbon Nanotube Field Emission Failure in the Transmission Electron Microscope

Breaking Single-Walled Carbon Nanotube Bundles by Joule Heating

In Situ Study of Field Emission Vacuum Breakdown of Individual Multi-Wall Carbon Nanotube

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

Initiation of vacuum breakdown and failure mechanism of the carbon nanotube during thermal field emission

Field Emission from Lateral Multiwalled Carbon Nanotube Yarn Emitters

Vacuum Breakdown Of Carbon-Nanotube Field Emitters On A Silicon Tip (Vol 83, Pg 2671, 2003)

Noncatastrophic and Catastrophic Vacuum Breakdowns of Carbon Nanotube Film under Direct Current Conditions

Carbon Nanotubes As Field Emission Sources

Carbon Nanotubes And Their Potential Field Emission Applications

The experimental characterization of vacuum breakdown in pulsed field emission from individual carbon nanotube

Study of Time Responsibility of Initial Vacuum Breakdown in Pulsed Field Electron Emission for Carbon Nanotube

Efficient Fabrication Of Field Electron Emitters From The Multiwalled Carbon Nanotube Yarns

Large Current Emission from CNTs Cold Cathode

Carbon-nanotube Cathodes on Optical Fibers

Crack-Assisted Field Emission Enhancement of Carbon Nanotube Films for Vacuum Electronics

Crystalline Multiwall Carbon Nanotubes and Their Application As a Field Emission Electron Source

A Display Module Implemented by the Fast High-Temperatue Response of Carbon Nanotube Thin Yarns

A vacuum sensor using field emitters made by multiwalled carbon nanotube yarns