Abstract:Carbon nanotubes (CNT) are nano-scale tubular structures which consist of seamless cylindrical shells of graphitic sheets. They were first found by professor Sumio Iijima in the arcdischarge soot between graphite electrodes in 1991 [1]. As a newly discovered carbon allotrope, CNTs have drawn worldwide attentions by their unique electrical, mechanical, and thermal properties. Seven years after their discovery, CNTs were synthesized in the form of arrays by chemical vapor deposition (CVD) [2,3]. For the first time in the history, billions of CNTs were aligned in the vertical direction on a substrate, and their growth position can be controlled by catalyst pattern design [3]. In 2002, we discovered a new type of CNT array, which is named the super-aligned CNT array. This kind of array was composed of clean, straight and defectfree CNTs, and there exist strong Van de Waals forces between adjacent nanotubes. Due to this unique feature, when one picks a strand of CNTs by tweezers or adhesive tapes, continuous long yarns or films can be simply pulled out from the array [4], as shown in figure 1. This discovery had enabled us to produce macroscopic materials with pure CNTs with a quick and easy dry spin process, as shown in figure 2. In 2005, we scaled up the substrate size of the CNT arrays from 1 inch to 4 inches, which could provide CNT films as wide as 10 cm [5]. Figure 1. The mechanism of dry spinning CNT yarns and films from super-aligned CNT arrays. The CNT yarns and films are composed of sparse parallel CNTs along the pulling direction. With the large percent of the vacancy between CNTs, the as drawn films can have transparency up to 90%. Therefore, CNT films can be used as a new type of transparent conductive film which have potential applications in liquid crystal displays and touch panels. The CNT films also have superb flexibility which is desired in flexible IT products. Figure 2. a) Spinning CNT film. b) A SEM image of the CNT film. c) A CNT film shrink into a fiber when passing through a drop of ethanol. d) A SEM image of the CNT fiber.

A Display Module Implemented by the Fast High-Temperatue Response of Carbon Nanotube Thin Yarns

Fast High‐Temperature Response of Carbon Nanotube Film and Its Application As an Incandescent Display

Load Characteristics of a Suspended Carbon Nanotube Film Heater and the Fabrication of a Fast-Response Thermochromic Display Prototype.

Carbon Nanotube Displays

Ablation and Patterning of Carbon Nanotube Film by Femtosecond Laser Irradiation

Scaled fabrication of single-nanotube-tipped ends from carbon nanotube micro-yarns and their field emission applications.

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

New-type planar field emission display with superaligned carbon nanotube yarn emitter.

Application of carbon nanotubes in displays

Fabrication of high-resolution multiwall carbon nanotube field-emission cathodes at room temperature

Development of carbon nanotube light array for large-size display

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

Cnt Research: From Academic Wonder To Industrial Exploration

Carbon-Nanotube-Film Microheater On A Polyethylene Terephthalate Substrate And Its Application In Thermochromic Displays

Carbon nanotube–cesium tungsten oxide–poly(N-isopropylacrylamide) hydrogel-based optical writing display

Carbon Nanotube Arrays on Flexible Substrate and Their Field Emission Characteristics

Continuous preparation of carbon nanotube fiber and its potential applications in electrical, thermal, mechanical and biosensing fields

MWCNTs Patterning by Thermally Enhanced and Confined Evaporation for Transparent and Conductive Thin Film

Dyeable electroconductive cotton wrapped CNT yarn for multifunctional textiles

In situ fabrication of HfC-decorated carbon nanotube yarns and their field-emission properties