Abstract:Highly densified CNT yarns with good mechanical, electrical, and electrothermal properties are manufactured by a continuously twisting method while the yarn is still wet. This strategy is expected to facilitate the large‐scale preparation of CNT yarns and their application in smart devices in the near future. Carbon nanotubes (CNTs) are promising blocks for building advanced yarns with unique structural and functional attributes. However, the complexity of fabrication and high cost has hindered the widespread adoption of CNT yarns. In this study, a rapid and continuous twisting wet spun yarn strategy to produce highly densified CNT yarns is presented. The method involves effectively dispersing CNTs in the surfactant dispersion, swiftly removing the surfactant in the coagulation bath and twisting treatment to effectively improve the density of yarn and the orientation of CNT. Detailed characterizations on the influence of each spinning conditions reveal that twisting treatment significantly enhances the packing density of yarns, improves the orientation of CNTs, and mitigates the impact of impurities on conductivity. The resulting CNT yarns exhibit a remarkable tensile strength of 600 MPa, a Young's modulus of ≈40 GPa, and a high conductivity of 8990 S cm−1. When utilized as a yarn heater, the CNT yarn demonstrates an ultra‐fast electrothermal response of over 1000 °C s−1 at a low operating voltage of 5 V. Impressively, the mechanical properties of CNT yarns show good stability during heating. This study provides a perspective of structural engineering for the large‐scale preparation of high‐performance CNT yarns.

In situ fabrication of HfC-decorated carbon nanotube yarns and their field-emission properties

Fabrication and Characterization of Gated Carbon Nanotube Emitters in A Trench Structure

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Carbon Nanotubes On Carbon Fabrics For Flexible Field Emitter Arrays

Improved Emission Stability of Hfc-Coated Carbon Nanotubes Field Emitters

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Scaled fabrication of single-nanotube-tipped ends from carbon nanotube micro-yarns and their field emission applications.

Conical Carbon Fibers with Carbon Nanotubes As Their Cores: Fabrication, Characterization and Field Emission

Improvement of the field emission of carbon nanotubes by hafnium coating and annealing

Efficient Fabrication Of Field Electron Emitters From The Multiwalled Carbon Nanotube Yarns

Field Emission from Dense, Sparse, and Patterned Arrays of Carbon Nanofibers

Improving field emission properties of single carbon nanotube by HfC evaporation coating

Field Emission from Single-Crystalline Hfc Nanowires

Field emission from combined structures of carbon nanotubes and carbon nanofibers

Carbon Nanotubes As Field Emission Sources

Fabrication of high-resolution multiwall carbon nanotube field-emission cathodes at room temperature

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

Wet Twisting in Spinning for Rapid and Cost‐Effective Fabrication of Superior Carbon Nanotube Yarns

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

Carbon Nanotube Arrays on Flexible Substrate and Their Field Emission Characteristics