Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Study of Time Responsibility of Initial Vacuum Breakdown in Pulsed Field Electron Emission for Carbon Nanotube

In Situ Study of Field Emission Vacuum Breakdown of Individual Multi-Wall Carbon Nanotube

The experimental characterization of vacuum breakdown in pulsed field emission from individual carbon nanotube

Observations of Carbon Nanotube Field Emission Failure in the Transmission Electron Microscope

Investigation of Pulsed Field Electron Emission from Carbon Nanotube Thin Films

Initiation of vacuum breakdown and failure mechanism of the carbon nanotube during thermal field emission

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Noncatastrophic and Catastrophic Vacuum Breakdowns of Carbon Nanotube Film under Direct Current Conditions

Quantitative analysis of electron field-emission characteristics of individual carbon nanotubes: The importance of the tip structure

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

Mechanism Responsible For Initiating Carbon Nanotube Vacuum Breakdown

The study of field emission properties of an individual carbon nanotube

Electron Emission and Structure Stability of Carbon Nanotube Cold Cathode Driven by Millisecond Pulsed Voltage

Vacuum Breakdown Of Carbon-Nanotube Field Emitters On A Silicon Tip (Vol 83, Pg 2671, 2003)

Post-breakdown Field Emission Behavior of a Planar-Structured Single SWNT Bundle in Air

High-Field Electrical Transport and Breakdown Behavior of Double-Walled Carbon Nanotube Field-Effect Transistors

Vacuum-Breakdown-Induced Needle-Shaped Ends of Multiwalled Carbon Nanotube Yarns and Their Field Emission Applications

Study on the Failure Behavior in Field Emission of Printed Carbon Nanotube Films

Study of Pulsed Field Emission Characteristics and Simulation Models of Carbon Nanotube Cold Cathodes

Effects of Pulsewidth and Area of Carbon Nanotube Films on Their Pulsed Field Emission Characteristics

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission