Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

The experimental characterization of vacuum breakdown in pulsed field emission from individual carbon nanotube

In Situ Study of Field Emission Vacuum Breakdown of Individual Multi-Wall Carbon Nanotube

Study of Time Responsibility of Initial Vacuum Breakdown in Pulsed Field Electron Emission for Carbon Nanotube

Observations of Carbon Nanotube Field Emission Failure in the Transmission Electron Microscope

In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Investigation of Pulsed Field Electron Emission from Carbon Nanotube Thin Films

Quantitative analysis of electron field-emission characteristics of individual carbon nanotubes: The importance of the tip structure

Initiation of vacuum breakdown and failure mechanism of the carbon nanotube during thermal field emission

Mechanism Responsible For Initiating Carbon Nanotube Vacuum Breakdown

Vacuum Breakdown Of Carbon-Nanotube Field Emitters On A Silicon Tip (Vol 83, Pg 2671, 2003)

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

Fabrication and Characterization of Gated Carbon Nanotube Emitters in A Trench Structure

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Effects of Pulsewidth and Area of Carbon Nanotube Films on Their Pulsed Field Emission Characteristics

Electron Emission and Structure Stability of Carbon Nanotube Cold Cathode Driven by Millisecond Pulsed Voltage

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

Electron Emission from Carbon Nanotube Films under Pulsed Fields

Field emission from single multi-wall carbon nanotubes

Vacuum-Breakdown-Induced Needle-Shaped Ends of Multiwalled Carbon Nanotube Yarns and Their Field Emission Applications

Experimental Observation of Ultra-High Field Emission Current from Single Carbon Nanotube Emitter

Electron Field Emission Characteristics and Field Evaporation of a Single Carbon Nanotube.