Abstract:The thermal, mechanical and corrosive properties of (Cu45Zr45.5Ti9.5)100-x Al x (x = 0–0.25 at%) glass forming alloys were systematically studied. The thermal measurements show that Al microalloying leads to increase of glass transition temperature but decrease of supercooled liquid region. The glass transition activation energy slightly increases and then decreases with increasing Al content. The room-temperature compression tests demonstrate that all studied Cu-based bulk metallic glasses (BMGs) exhibit work-hardening behavior, but the work-hardening capacity depends on Al content. In addition, yield strength, fracture strength and fracture strain are drastically increased by Al addition. The largest plasticity of (Cu45Zr45.5Ti9.5)99.8Al0.2 BMG is 6 times larger than that of the Al-free Cu-based BMG. Moreover, the electrochemical measurements indicate that the Al minor addition cause the decrease of both corrosion potential and corrosion current density. The corrosion behavior gradually transforms from the pitting corrosion to the self-passivization with increasing Al content. The local heterogeneity of Al element is thought to be the reason for the performance change of the studied Cu-based BMGs. The present results would provide a new insight into the mechanism for the microalloying effect on the properties of the metallic glasses.

Formation, Mechanical Properties and Corrosion Behavior of Zr-Al-Co-Er-Cu Bulk Metallic Glasses

Glass Forming Ability and Corrosion Resistance of Zr-Cu- Ni-Al-Ag Bulk Metallic Glass

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

A Novel Ni-Free Zr-Based Bulk Metallic Glass with High Glass Forming Ability, Corrosion Resistance and Thermal Stability

Design Of Cu8zr5-Based Bulk Metallic Glasses

Formation of Bulk Metallic Glasses in Cu45Zr48−Al7RE (RE = La, Ce, Nd, Gd and 0 ≤x≤ 5 At.%)

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Preparation, Characterization, and Properties of Novel Ti-Zr-Be-Co Bulk Metallic Glasses.

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Glass formation, chemical properties and surface analysis of Cu-based bulk metallic glasses

Composition design and mechanical properties of ternary Cu–Zr–Ti bulk metallic glasses

Ti Microalloying Effect on Corrosion Resistance and Thermal Stability of CuZr-based Bulk Metallic Glasses

Cu-Based Bulk Glassy Alloys with Good Mechanical Properties in Cu-Zr-Hf-Ti System

High-strength Cu-based bulk glassy alloys in Cu–Zr–Ti and Cu–Hf–Ti ternary systems

The Correlation among the Atomic Structure, Electronic Valence Band and Properties of Zr-Cu-Al-Ag Bulk Metallic Glasses

Zr–(Cu,Ag)–Al Bulk Metallic Glasses

Formation of Ni–Nb–Zr–X (X = Ti, Ta, Fe, Cu, Co) Bulk Metallic Glasses

Co Content Effect on Elastic Strain Limit in ZrCuNiAlCo Bulk Metallic Glasses

Failure behavior of Cu–Ti–Zr-based bulk metallic glass alloys

Effect of Al Composition Tuning on Properties and Structure in Zr-Co-Al Metallic Glass