Abstract:Side-pumping fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers and amplifiers operating in the mid-IR wavelength range and based on soft-glass optical fibres. However, conventional fabrication methods face limitations due to significant differences in the thermal properties of pump-delivering silica fibres and signal-guiding fluoride-based fibres. To address these challenges, this work introduces a design for a fuse-less side-polished (D-shaped) fibre-based pump combiner comprising multimode silica and double-clad fluoride-based fibres. The results demonstrate stable coupling efficiency exceeding 80% at a 980-nm wavelength over 8 hours of continuous operation under active thermal control. The developed pump combiner has also been successfully integrated into a linear Er-doped fibre laser cavity, showing continuous-wave generation at 2731 or 2781-nm central wavelength with an output power of 0.87 W. Overall, this innovative approach presents a simple, repeatable, and reproducible pump combiner design that opens up new possibilities for leveraging fibre-based component technology in soft glass matrices and other emerging fibres with unique compositions.

A Non-Fused Fiber Coupler for Side-Pumping of Double-Clad Fiber Lasers

Fused Side-Coupler for Double-Clad Fiber Lasers

Fused side-coupler for double-clad fiber lasers with CO_2 laser

Fiber coupler for mode selection and high-efficiency pump coupling.

100 Μm Core Diameter Monolithic Fiber Side-Pumping Coupler for 10 Mj 10 Ns All-Fiber Laser

Side-pumping Coupler Technology for Double-Clad Fiber

Experimental Demonstration of a Compact Variable Single-Mode Fiber Coupler Based on Microfiber

Multi-coupler Side-Pumped Yb-doped Double-Clad Fiber Laser

Studies of pump light leakage out of couplers for multi-coupler side-pumped Yb-doped double-clad fiber lasers

Fusion Splicing of Double-Clad Specialty Fiber Using Active Alignment Technology

Fused angle-polished multi-points side-pumping coupler for monolithic fiber lasers and amplifiers

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

Low-Loss Coupling from Coated Plano Convex Lens to Single Mode Solid Core Fibers Laser by Lensing Scheme

A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers

Side-Pumped Yb-Doped Double-Clad Fiber Laser

Femtosecond laser inscription of asymmetric directional couplers for in-fiber optical taps and fiber cladding photonics

Research on Characteristics of Co-Linear Side-Pumping Couplers with Special Double-Clad Fibers

A 110-W Fiber Laser with Homemade Double-Clad Fiber

Multi-Coupler Side-Pumped Yb-Doped Double-Clad Fibre Laser and Pump Light Leakage at Coupler

Side-polished Silica-Fluoride Multimode Fibre Pump Combiner for Mid-IR Fibre Lasers and Amplifiers

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.