Abstract:Failure analysis on a fractured radome framework component was carried out through visual observations, metallographic examination using optical microscope, fractography inspections using scanning electron microscope and chemical composition analysis. The failed frame was made of casting Al-Si7-Mg0.4 aluminum alloy. It had suffered a former vibration performance tests. It was indicated that the fractures were attributed to fatigue cracks which were induced by casting porosities at the outer surfaces of frame. Failure analysis was carefully conducted for the semi-penetrating crack appearing on the framework. According to the fractography inspected by scanning electron microscope, it was indicated that numerous casting porosities at the outer surface of the framework played the role of multiple fracture sources due to some applied stresses. Optical microstructure observations suggested that the dendrite-shaped casting porosities largely contributed to the crack-initiation. The groove-shaped structure at roots of spatial convex-bodies on the edge of casting porosities supplied the preferred paths of the crack-propagation. Besides, the brittle silicon eutectic particles distributing along grain boundaries induced the intergranular fracture mode in the region of the overload final fracture surface.

Failure Analysis of Nodular Iron Production

Fracture failure analysis on Alloy783 bolts in medium-pressure valve bonnets of USC units

Cause Analysis on Microstructure Change for Rings of Failure Bearings

Study on High Chromium Cast Iron Fracture Grinding Roll

Analysis of the characteristics and formation causes of granophyric defect on the surface of ship plate

Failure Analysis on the Rear Axle Shaft of Automobile

Fracture Analysis of the Transmission Shaft in Screw-Drilling Device

Fracture failure analysis of vertical arm of rear axle

Research on the Failure Mechanism of High Chromium Cast Iron Grinding Ball

Fracture Analysis on A Cylindrical Shell Section of the Low-Pressure Absorption Tower

Failure Analysis on Fracture of 16mn Steel

Fracture Analysis of High Chromium Cast Iron Roll on CSP Mill

Failure Analysis of Cold Rotary Swaging Die

Failure Analysis of Weld Cracking in a Thick-Walled 2.25Cr-1Mo Steel Pressure Vessel

Fracture failure analysis of 21CrMoV5.11 steel continuous casting roller

Fracture failure analysis and research on super-large-diameter roll

Failure analysis of welding nut on the cover plate of automobile hydraulic torque converter

Analysis on Weld Cracking in Q345 Cylinder

Failure Analysis Used for Remanufacturing of Steel Rolling Components

Microstructure Characteristics and Mechanical Properties of New-Type FeNiCr Laser Cladding Alloy Coating on Nodular Cast Iron

Failure Analysis of an Aluminum Alloy Material Framework Component Induced by Casting Defects