Abstract:A single layer simplified finite element model for zero thickness adhesive force was proposed by applying relative boundary conditions;it can avoid the high computational cost due to the thin layer,the large layer number and the three-dimensional modeling in the multilayer ceramic capacitors(MLCCs).Based on the present model,the damage process,including the crack initiation and propagation due to the over residual stress in the MLCCs,is simulated.The results show that compared with the electrode/ceramics interface along the length direction,the electrode/ceramics interface along the thickness direction is more likely to fail by forming penetrative cracks leading to the final failure of the MLCCs.The analysis on the interface failure initiation time under different ratio of electrode layer thickness to ceramics layer thickness and the unit volume energy dissipation change of adhesive force with time indicates that with the increase of the ratio of electrode layer thickness to ceramics layer thickness,the unit volume energy dissipation increases and the MLCCs are more likely to fail.

Failure analysis for the chip capacitor

Failure Analysis On The Chip Capacitor

Degradation Analysis and Failure Prediction of Aluminum Electrolytic Capacitors

Failure Analysis on IC Chips Based on ESD

The Influences of the Shaping Mould Design on the Performance of Capacitor and the Corresponding Countermeasure

Failure Analysis of Cracked Die

One failure analysis of welding on end electrode in multilayer ceramic capacitors

Failure Analysis Application in Semiconductor Device R_c Failures

Failure analysis of electroplating on sliver termination in multilayer ceramic capacitors (MLCCs)

Analysis On The Causes Of Decline Of Mlcc Insulation Resistance

Failure model and mechanism of multilayer ceramic capacitor

Analysis Method of Multilayer Ceramic Capacitor Fracture by the Phase-Field

Failure Mechanism Study for Flip Chip QFN Crack Issue under Temperature Cycling Test

Failure Analysis of Multi-layer Ceramic Capacitors under Board Level Shock Environment

Analysis on Welding Failure of Terminal Electrode of Multilayer Ceramic Capacitors by SEM

Analysis Method of Multi-Layer Ceramic Capacitor Fracture by the Phase-field

Analysis on insulation aging failure of pulse capacitor

Finite Element Model for Adhesive Force of Multilayer Ceramic Capacitors and Failure Analysis

Failure analysis on the BGA solder joint

Failure analysis of ENIG pads

Design and FEM Analysis of Multilayer Ceramic Capacitors with Improved Bending and Thermal Shock Crack Performance