Abstract:Sintered foils are currently being considered as a promising material for anode foils in capacitors due to their high specific capacitance and anti-buckling performance, which meet the requirements for capacitor winding. In this article, sintered foils with added starch were produced using a protective atmosphere sintering process. The effect of starch addition in the range of 0–50 vol% on the specific capacitance and anti-buckling performance of the sintered foils was evaluated. Scanning electron microscope (SEM) analysis confirmed the formation of the pores in the sintered foils due to the addition of starch. These pores play a crucial role in improving the specific capacitance and enhancing the anti-buckling performance of the sintered foils. However, excessive amounts of starch can have a negative impact on the specific capacitance of the sintered foils which initially decreased, then increased, and finally decreased with increasing starch content. On the other hand, the anti-buckling performance increased with increasing starch content. At 30 vol% starch addition, a high specific capacitance of 0.886 μ F/cm 2 and an anti-buckling performance of more than 120 times were obtained, meeting the requirements for anode foils in aluminum electrolytic capacitors. The specific capacitance of the sintered foils was predicted using the close-packed packing model, which can help establish a powder metallurgy method for preparing anode foil materials with high specific capacitance and anti-buckling performance for aluminum electrolytic capacitors.

The Influences of the Shaping Mould Design on the Performance of Capacitor and the Corresponding Countermeasure

Analysis of the Factors Influencing the Insulation Resistance in Preparation of Microwave MLCC

Influence of Solder on De-Embedded Capacitance

A strategy to detect the effect of electrode defects on the electrical reliability in multilayer ceramic capacitors

Using Embedded Capacitance to Improve Electrical Performance and Reduce Board Size

Study on two kinds of etching methods to processing embedded capacitor PCB and the comparison between them

Influence Of The Excitation Current In Traveling Magnetic Field On Mold Filling And Surface Depression Of Thin-Walled Casts

Effect of bias potential and dimension on electrochemical migration of capacitors for implantable devices

Computer-aided Optimizing Design of Discharge Circuit for a Capacitor Stored Energy Spot Welding Machine

Progress in the Studies of Anode Foils for High Voltage Electrolytic Capacitor

Study on Magnetic Field Distribution in Electromagnetic Ingot Casting Mold for Extra Heavy Plate

Investigation and Improvement Strategies for Mold Fracture: A Study on the Application of a Pulse Electrodeposition Method for Enhancing Mold Lifespan

Numerical simulation study on the mold strength of magnetic mold casting based on a coupled electromagnetic-structural method

Mould Design Optimization of Typical Part Based on CAE Analysis

Study on Surface Charge and Mechanical Properties of Epoxy Impregnated Paper Composites

Numerical Analysis of the Influences of Operational Parameters on the Fluid Flow in Mold with Hybrid Magnetic Fields

Microstructure Evolution and Performance Enhancement of Sintered Aluminum Foils for Aluminum Electrolytic Capacitors

The Influence Of M-Effect Metal Arrangment On The Overload Current Pre-Arcing Time Of Dc Current-Limiting Fuses

Analysis on Welding Failure of Terminal Electrode of Multilayer Ceramic Capacitors by SEM

The Research on Micro Electronic-Magnetic Forming of Sheet Metal

The study on metal-insulator-metal capacitor performance improvement