An Interface Design for PC/104 Bus with CPLD

LI Peng-gang,HU Xu-dong

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.12.011

2005-01-01

Abstract:With analysis PC/104 Bus timing diagram,design state machine.Then finish interface design to PC/104 Bus with CPLD in Maxplus-II.And realize normal data transportation and address decode on PC/104 Bus.

What problem does this paper attempt to address?

Design of Program-controlled Multi-channel Switch Based on CPLD

Wang Chengjian,Ma Yan,Gao Tiande

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2009.04.014

2009-01-01

Abstract:Aimed at the extensive application of multi-channel analog switches in kinds of fields such as automated test device,the hardware design of one program-controlled multi-channel switch is introduced.Low-leakage MOS electronic switches are selected as the main components.The data and codes are transferred through the PC104 bus between computer and system.As the logic control center,the internal logic of CPLD is partitioned into two main function modules,which can implement the PC104 bus interface and the control logic of multi-channel switches.Then the boards of system are debugged and tested,results showed that system could work with low on-state resistance,high off-state resistance and high operating speed.
Design 429 Interface Card Based on PC 104 Bus Using CPLD

WU Xiao-jie,ZHAI Zheng-jun,GUO Lin-na,LI Lan-lan

DOI: https://doi.org/10.3969/j.issn.1000-7024.2006.16.038

2006-01-01

Abstract:A kind of new 429 interface card based on PC104 bus is put foruard according to the research situation of the 429 interface cards. Because of thefinite available space on the PC104 card, it use high integrated degree, complex programmable logic device CPLD implement the data communication between 429 bus and PC104 bus. The integrated degree of CPLD may save high efficiently the space on card. And compare with ASIC, its designing and developing cycle is shorter, its cost is lower, its designing and developing tools are advanced, its test is simple, and its quality is stable. Compare with microprocessor, its processing rate is higher. So it can improve the performance of this 429 interface card. And the system can successfully run through the system's designing and its experiments.
A kind of according to CPLD of a machine and PCI connect a people's design solution

Gao Jianhua

DOI: https://doi.org/10.3969/j.issn.1008-0570.2006.17.082

2006-01-01

Abstract:The article introduce a method of parallel communication between expand MCU and interface of PC104 by CPLD chips (XC95216) of xilinx company. The method saluted some problems of flush bonding OS & bus devices in main board so that integrat-ing the functions of Ethernet card in CPLD (XC95216). The article gave the main source program of VHDL. The method was passed by test of practice.
Design of 1553B Bus Interface Based on TMS320F2812 and DSP/BIOS

Xian-cheng ZHENG,Guo-jun ZHANG,Xiao-bin ZHANG

DOI: https://doi.org/10.3969/j.issn.1000-8829.2008.07.019

2008-01-01

Abstract:The design of 1553B bus interface is proposed.TMS320F2812 is used as the processor,and BU-61580 as protocol chip.CPLD is introduced for logic integration.The software platform is designed based on the embedded real-time operation system DSP/BIOS.The hardware circuit design and drivers accomplishment are introduced particularly.Now it has been communicating to an up computer successfully and runs well through testing.
Hardware Design and Realization of ARINC429 Bus Interface Board Based on PCI Bus

Shi Guoqing,Gao Xiaoguang,Wu Yong,Zhang Jiandong

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2010.01.028

2010-01-01

Abstract:A hardware design and realization of multi-channel intelligent ARINC429 bus interface board based on PCI bus is introduced.In the design,using PLX's PCI9052 as a PCI bus interface chip,using TI's TMS320F2812 as the embedded CPU of the interface board,combined with Device Engineering Corporation's DEI1016 and BD429 chips as ARINC429 bus interface,using Altera Corporation's FPGA chip EP1C12 to realize the address decoder,logic control functions of the interface board.This circuit design simplifies the PCI interface circuit design of the interface board,effectively improves the executing speed of the interface board,while it has the virtue of high integration,small size,communication channels can be changed etc.The interface board has been used in numbers of application projects,the experiment in which proved its good stability and high performance.
Bus interface controller design for embedded microprocessor using CPLD

吴朝晖,郑学仁,胡鹏

DOI: https://doi.org/10.3969/j.issn.1003-353X.2001.04.014

2001-01-01

Abstract:A bus interface logical circuit between a embedded microprocessor MPC860 and a digital signal processing chip TMS320 using CPLD is presented in this paper. The designed circuits of bus interface controller and some simulating result are given.
Design and implementation of model machine controller based on CPLD

Dan XU,Heng-shan GENG,Li-chun ZHANG,Tian-yi LI,Chao WANG

DOI: https://doi.org/10.3969/j.issn.1000-7024.2014.07.069

2014-01-01

Abstract:For the current situation that most of the machine controllers were in the microprogram control mode,a complex pro-grammable logic device (CPLD)was used to realize the design of model machine controller.First of all,the instruction system of model machine was designed,which had twenty three instructions.Then,through the Quartus II software,the schematic de-sign instruction decoder,temporal rhythm circuit and combinational logic circuit modules were used to constitute a complete mo-del machine controller.Finally,the compiled schematic file was downloaded to Altera MAX II devices for validation.The experi-mental results showed that,the model controller designed by CPLD improved the execution speed of instructions,enhanced the flexibility of the design and reduced the cost of experiments.
Programmable Logic Design on PCI9054 Local Bus Control

彭杰,汪国有,张天序

DOI: https://doi.org/10.3969/j.issn.1006-9348.2003.09.025

2003-01-01

Abstract:PCI bus is high bandwidth, being independent of CPU, high capacity bus. The bus interface controller design is its key techniques to application .In this paper, the PCI9054 interface controller is introduced, the PCI9054 local bus interface controller is designed with programmable logic. According to the design, the data transformation and communication between PCI9054 local bus and local bus device are realized easily.
The Design of Intelligent 429 Bus Interface Card Based on Dual-Port RAM

Shao-hua LIU,Jian-guo YAN,Ge-qun LIU

DOI: https://doi.org/10.3969/j.issn.1674-5795.2005.01.015

2005-01-01

Abstract:In the design of the intelligent 429 bus interface card,a single chip processor and a dual-port RAM are used.The card can deal with the communication data automatically and quickly.Using the dual-port RAM as a single chip and ISA bus data mutual media,the transmission velocity is improved. The address space allocation of dual-port RAM and a share conflict arbitration are discussed.The software of interface card is introduced. Its results show that it has advantage of high velocity and good reliability.
Implementation of the interface card for a position control system

WANG Peng,GUO Mei-feng,DONG Jing-xin,ZHAO Chang-de

DOI: https://doi.org/10.3969/j.issn.1002-4956.2008.01.018

2008-01-01

Abstract:For the purpose of making students handle the technology of computer control,an interface card is designed with CPLD,which is used in the computer control system class.The card includes interface to PC/104,sample pulse generator,counter of position,D/A,etc.It can support students to realize kinds of control method through programming on computer,so to solidify the knowledge of computer control.
Design of 4 Serial Port Intelligence Communication Module Based on Embedded PC104 Bus

XU Zhen-kai,XU Xiao-su,BAI Yu-jun

DOI: https://doi.org/10.3969/j.issn.1004-1699.2005.04.051

2005-01-01

Abstract:A method of designing 4 serial port intelligence communication module with the embedded microprocessor is put forward.Master CPU and slave CPU are used to control information transmission together.Slave CPU takes charge of reception and sending,so that master CPU can assign few resources for communication task.CPLD technology and high speed serial port chip are adopted in this module,it can be concluded that the serial port communication extended module be provided with intelligence programmed and real time parallel peculiarity and it can achieve the requirements of the actual industrial controlled object.
Design and Implementation of 1553B Bus Detection-Control System

Dong Yanjun,Liu Ying,Zhang Xiaobin

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2008.11.060

2008-01-01

Abstract:A new 1553B bus detection control system is designed with 1553 bus control card and based on the VxWorks OS.The control center is implemented with Intel486 CPU system and it use PC104 bus as system bus.A/D module and 1553 bus control card are used to implement data acquisition and transmission function.Designed and programmed hardware driver and applications based on VxWorks OS.The detection control system is stable and reliable by ground testing.All tasks such as data acquisition and real-time communication are running well.The design target of real-time and high-speed has been fitted.
Design of an Analog Data Acquisition Module Based on PC/104 Bus for Missile Control System

LI Jin,HU Chang-hua,HE Hong-wen,LV Ying-jie

DOI: https://doi.org/10.3969/j.issn.1671-637x.2005.04.015

2005-01-01

Electronics Optics & Control

Abstract:An multi-channel analog data acquisition module for control system of the missile is designed based on PC/104 bus. Complex Programmable Logic Device (CPLD )is used as the kernel processor of the logic circuit of the module, and each kind of analog signal of the missile control system can be measured rapidly and accurately through the module.
Design and Realization of 1553B Bus Interface Board Based on DSP

Shi Guoqing,Gao Xiaoguang,Wu Yong,Zhang Jiandong

DOI: https://doi.org/10.3321/j.issn:1671-4598.2005.12.034

2005-01-01

Abstract:The design and realization of 1553B bus interface board based on DSP are put forward.The high performance fixed point DSP TMS320F206 from TI and the Advanced Communication Engine(ACE) BU-61580 from DDC are all used in the design of hardware.The function of logical control is implemented by FPGA.This circuit scheme used in the design of 1553B bus interface board has been checked and accepted and runs well.
Design and Realization of a High-Speed Image Signal Acquisition System Based on CPLD

Wei ZHANG,Wen LIU,Zhaohui LIU

DOI: https://doi.org/10.3969/j.issn.1671-637X.2009.02.025

2009-01-01

Electronics Optics & Control

Abstract:Considering the requirement of high-speed data acquisition for image processing system,we designed a high-speed acquisition interface system based on the CPLD and SRAM chips by using the theory of bus switch and Ping-pong control.The design methods of software and hardware are discussed in detail,and various possible abnormal situations are analyzed.Test on the spot and long-time running proved that the system is stable in operation with strong anti-jamming capability,which can satisfy the high-speed,real-time requirement of preceding image data.
Design of Frequency Measuring Module Based on PC104 and CPLD

Guohua LIU,Huafeng HE,Pengfei TIAN,Lin WANG

DOI: https://doi.org/10.3969/j.issn.1004-373X.2010.02.028

2010-01-01

Abstract:According to the need of some test system,a high-accuracy frequency measuring module is designed based on PC104 and CPLD.A method of synchronous multi-period frequency measurement is used to achieve the equal precision measure to the tested frequency channel.The hardware circuit of the frequency measuring module is designed.And the detailed VHDL source code to achieve digital frequency using CPLD is given.The interface logic of PC104 bus is compiled using the way of schematic diagram,and the emulation is done by the software of MAXPLUSⅡ.The digital frequency and the interface logic are accurately working showed by the result.This frequency measuring module has been proved to be high-accurate,stable and reliable in the practical application.
Design of Bus Interface in a Certain Simulation System

Ma Jiezhong,Gao Hui,Ding Nan

DOI: https://doi.org/10.16526/j.cnki.11-4762/tp.2008.10.023

2008-01-01

Abstract:The QBus and MⅢare parallel bus,The bus interface simulates equipment to send data and receive data,and monitors the communication of QBus and MⅢ.Introduce the component and the functions of the inter{ace,design the modules of the function.The de- tailed description to various hardware modules are presented,and finally the main logical functions of the interface card are realized by FPGA.
Design on Intelligent Traffic Machine Driver Board Based on MCS-51 and CPLD

LIANG Juan,QU Shi-ru

DOI: https://doi.org/10.3969/j.issn.1000-0682.2008.01.014

2008-01-01

Abstract:The paper introduces a driver board for intelligent traffic machine based on MCS-51 and CPLD.The actuality of traffic machine is described,and the required function for driver board is proposed. The develop including hardwire design,software design and logic realization for I/O expansion is presented in detail.The driver board can be applied to any intersection because of combining traffic signal control and safety detection.
The Design of USM Controller Based on CPLD

YANG Yong-liang,MA Rui-qing,LI Ying

DOI: https://doi.org/10.3969/j.issn.1004-7018.2006.09.011

2006-01-01

Abstract:A circuit design of USM controller based on CPLD is introduced.Some main circuit's features,including the pulsed drive signals generation,logic frequency division and phase deviation, driver and singlerpole feedback are analyzed,and at last the results of experiment are given.The controller has some advantages of little bulk,compact structure and convenient debug,so it is good valuable of realization.

An Interface Design for PC/104 Bus with CPLD

Design of Program-controlled Multi-channel Switch Based on CPLD

Design 429 Interface Card Based on PC 104 Bus Using CPLD

A kind of according to CPLD of a machine and PCI connect a people's design solution

Design of 1553B Bus Interface Based on TMS320F2812 and DSP/BIOS

Hardware Design and Realization of ARINC429 Bus Interface Board Based on PCI Bus

Bus interface controller design for embedded microprocessor using CPLD

Design and implementation of model machine controller based on CPLD

Programmable Logic Design on PCI9054 Local Bus Control

The Design of Intelligent 429 Bus Interface Card Based on Dual-Port RAM

Implementation of the interface card for a position control system

Design of 4 Serial Port Intelligence Communication Module Based on Embedded PC104 Bus

Design and Implementation of 1553B Bus Detection-Control System

Design of an Analog Data Acquisition Module Based on PC/104 Bus for Missile Control System

Design and Realization of 1553B Bus Interface Board Based on DSP

Design and Realization of a High-Speed Image Signal Acquisition System Based on CPLD

Design of Frequency Measuring Module Based on PC104 and CPLD

Design of Bus Interface in a Certain Simulation System

Design on Intelligent Traffic Machine Driver Board Based on MCS-51 and CPLD

The Design of USM Controller Based on CPLD