Abstract:This paper predicted thermal responses of plain-woven composites with interfacial and internal defects based on the multi-scale simulation. The effective and localized responses of plain-woven composites are simulated through "bottom-up" homogenization and "top-down" localization across several scales. Peri-odic representative volume elements (RVEs) are extracted at micro-scale, meso-scale and macro-scale, respectively, to represent the entire composite arrays at distinct scales. The local behavior of RVEs is predicted by either finite element method (FEM) or the locally exact homogenization theory (LEHT), the latter of which is employed to simulate the effect of imperfect interface between fiber and matrix to avoid large-scale mesh refinement in FEM, especially at the vicinity of physical interphase/ cohesive dam-aged interface. Based on the localized temperature/heat flux distributions, the effect constitutive relations are introduced to predict the corresponding effective thermal coefficients. The accuracy and efficiency of the proposed method is verified by validating the predicted effective coefficients against the results in literature. Several microstructural parameters, including interfacial parameters, internal porosity volume fraction, as well as fiber contents are tested on the effective response and it is found that effective ther-mal conductivity of plain-woven composites varies greatly when the interfacial parameter of imperfect interface lied in range of "sensitivity zone", while the thickness of physical interphase has less signifi-cant influence on the in-plane and out-of-plane thermal conductivities. More importantly, the reinforc-ing/weakening schemes of fiber or damaged interface are illustrated through recovering the local thermal distribution and demonstrating the significant interfacial effect. The model established in this paper can provide theoretical guidance for the neglected imperfect interface and internal defects in plain woven composites. (c) 2022 Elsevier Ltd. All rights reserved.

3D FE Analysis on the Product Defects of Composites Formed by Liquid–solid Extrusion Process

Micro Failure Analysis of Fiber Metal Laminates

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Evolution of Manufacturing Defects of 3D-Printed Thermoplastic Composites with Processing Parameters: A Micro-CT Analysis

Effect of Manufacturing Defect on Mechanical Performance of Plain Weave Carbon/epoxy Composite Based on 3D Geometrical Reconstruction

Multi-scale finite element simulation of the thermoforming of a woven fabric glass fiber/polyetherimide thermoplastic composite

A novel numerical simulation method for predicting compressive properties of 3D multiaxial braided composites considering various defects

Consolidation and Warpage Deformation Finite Element Analysis of Filament Wound Tubes

Computer Simulation Analysis of Ceramic Powder Injection Molding Process and Molding Defects Formation

Process-dependent Multiscale Modeling for 3D Printing of Continuous Fiber-reinforced Composites

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

Efficient numerical analysis of in-plane compression-induced defects in thick multi-ply woven textile preforms during double diaphragm forming

Modelling of the temperature and residual stress fields during 3D printing of polymer composites

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Atomistic Modeling of the Effect of Temperature on Interfacial Properties of 3D-Printed Continuous Carbon Fiber-Reinforced Polyamide 6 Composite: From Processing to Loading

Multiscale Numerical Modeling for Thermal Behavior of Plain-Woven Composites with Interfacial and Internal Defects

Three-dimensional Finite Element Analysis of Process-Induced Residual Stress in Resin Transfer Molding Process

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

Process evaluation, tensile properties, mathematical models, and fracture behavior of 3D printed continuous fiber reinforced thermoplastic composites