Abstract:In view of the decreasing trend of column widths in steel residential buildings, a new type of concrete filled rectangular steel tubular column-H-section steel beam connections with external stiffeners is proposed. The diaphragm is removed in this connection. Pseudo-static tests of seven new joint specimens were carried out. The test parameters were the section of the steel beam and the thickness and the height of the long side of the external stiffeners. The failure modes, hysteretic curves, skeleton curves, strength, stiffness degradation, strength degradation, ductility and energy dissipation capacity of the joints were studied. The test results show that there were three failure modes of this new joint, namely, tensile failure of beam flange, weld failure between beam flange and external stiffener, and column wall failure near the external stiffener. The ductility coefficient was 2.17 to 3.67, the equivalent viscous damping coefficient was 0.2 to 0.3, and the average drift ratio was 1/49. The seismic performance of the joint met the requirements of strong joints and weak members. Increasing the thickness or the height of the long side of the external stiffeners can increase the strengths of the joints. The premature cracking of the beam flange, the welding seam between beam flange and external stiffener, or the column wall will reduce the ductility and energy dissipation capacity of the joints. It is proposed that the connection coefficient should be 1.4 when checking the ultimate strength of the column wall and joint weld. The strengthening or weakening measures on the flange at the beam ends can be taken to ensure that the new joints have a sufficient plastic deformation capacity.

TOP JOINT STUDY ON TEMPERATURE STRESS FOR SUPER-LONG SLAB-COLUMN STRUCTURE

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

STUDY OF THE STRESS DISTRIBUTION AND MECHANICAL PROPERTIES OF THE BEAM-COLUMN JOINT IN STEEL ROOF TRUSS BASED ON FULL-SCALE TESTS

Research on Shear Properties of Top Story T-Joints in R.C. Frame Structure with Special-Shaped Columns under Low Cyclic Reversals

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

ANALYSIS OF UNBONDED PRESTRESSED TECHNIQUE IN CONTROLLING TEMPERATURE STRESS OF SUPER-LONG STRUCTURE

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

ANALYSIS ON TEMPERATURE STRESS OF SUPER-LONG FRAME STRUCTURE WITH BEAM TEMPERATURE LAG TAKEN INTO ACCOUNT

Temperature Stress Analysis of an Overlength Basement Concrete Structure

Analysis and engineering practice of temperature stress on super-long concrete structures

Research of the combined effects by temperature action and the loads on the block masonry structure

Temperature Joint Study of Reinforced Concrete Frame and Bent

An experimental study on the seismic performance of beam-column joints in steel frames with the effect of concrete slabs considered

Experimental and Numerical Investigation of Cross-Shaped Joints with Adjustable Stiffness for Cold-formed Thick-Walled Steel Column–Column Connections

ANALYSIS ON THE STRESS PATTERNS OF THE JOINT BETWEEN CONCRETE-FILLED RECTANGULAR STEEL TUBULAR COLUMNS AND STEEL BEAMS

Examination of the Behavior of Double Cold-Formed Steel Columns with Σ-Shaped Sections Subjected to Non-Uniform Temperature Conditions

Simulation of Mechanical Properties of Special-Shaped Concrete-Filled Steel Tubular Column and Steel Beam Joints after Fire

Experimental study on axial compression properties of concrete filled steel tubular stub columns in varying ambient temperature

Analytical Methods for Temperature Field and Temperature Stress of Column Pier under Solar Radiation