Abstract:Research purposes:As the existing researches on the longitudinally connected ballastless track mostly consider the variation of the overall temperature of the bridge and neglect the structural temperature gradient,a non-linear structural temperature pattern is fitted through statistical methods on the basis of the temperature field data,the data is acquired through the long term measurement on the field.A finite element model which considers the integration of rail,track plate,base plate,bridge and pier is established.A practical example of a certain large-span continuous girder bridge of Shanghai-Kunming high-speed railway is selected in this paper.The relative displacements between the various layers of track structures and the distribution rules of the longitudinal additional stress of the rail are respectively analyzed under the nonlinear temperature mode.Research conclusions:(1) The rail additional stress is nearly 0,when only consider the temperature pattern of track plate and bed plate.(2) The temperature gradient of the bridge will trigger the sharp increase in the rail additional stress of the beam crevice,the structural temperature gradient needs to be considered in the research on longitudinally connected ballastless track.(3) The deformation of cement and asphalt mortar above the consolidation of the large-span continuous bridge exceeds its ultimate deformation tested by the experiment,it is suggested that shear reinforcement should also be installed above the consolidation of the continuous girder bridge.(4) Broken plate will cause the significant increase of the rail additional stress,and therefore,the occurrence of the fracture of the longitudinally connected ballastless track should be rigorously restricted,and the exchange of the ballastless track should be done within the closure temperature.(5)The research results can provide reference for the design and improvement of longitudinal slab ballastless track on long span bridge.

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

An analytical method and its application for large-section PC box girder bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Analysis of Vertical Temperature Gradients and Their Effects on Hybrid Girder Cable-Stayed Bridges

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Thermal Simulation on the Flat Steel Box Girder of the Maputo Bridge under Solar Radiation

Temperature Field Boundary Conditions and Lateral Temperature Gradient Effect on a PC Box-Girder Bridge Based on Real-Time Solar Radiation and Spatial Temperature Monitoring

Global temperature behavior monitoring and analysis of a three-tower cable-stayed bridge

Experimental and statistical investigation on temperature gradient of CFST truss chords

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data

Thermal Effect on Dynamic Characteristics of Concrete Girder Bridges

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Analytical Methods for Temperature Field and Temperature Stress of Column Pier under Solar Radiation

Probabilistic Analysis of Stress Concentration Factor of an Orthotropic Steel Bridge with FBG-Based Structural Health Monitoring System *

Analysis of Longitudinally Connected Ballastless Track on the High-speed Railway Long-span Bridge Based on the Actual Measured Temperature

Temperature gradient estimation of long-span concrete box girders using average conditional exceedance rate function

Failure Analysis for Overall Overturning of Concrete Single-Column Pier Bridges Induced by Temperature and Overloaded Vehicles