Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Temperature Joint Study of Reinforced Concrete Frame and Bent

Influencing Factors Of Temperature Action And Joint Distance Of Reinforced Concrete Frame And Bent Structures

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

EXPERIMENTAL INVESTIGATION OF BEHAVIOR OF REINFORCED CONCRETE FRAMES AT ELEVATED TEMPERATURE

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental Investigation and Design of Thin- Walled Concrete-Filled Steel Tubes Subject to Bending

Numerical Analysis of Softening Relationship for Early-Age Concrete

Behaviour Of Concrete-Filled Tubular T-Joints Under In-Plane Bending Cyclic Loading

ANALYSIS OF THE TEMPERATURE FIELD OF REINFORCED CONCRETE STRUCTURE

The Temperature Field Test and Analysis During the Cantilever Construction of the Long-span Continuous Rigid-frame Bridge

Moment-rotation relations of concrete filled steel tube column connections at high temperatures

ANALYSIS ON TEMPERATURE STRESS OF SUPER-LONG FRAME STRUCTURE WITH BEAM TEMPERATURE LAG TAKEN INTO ACCOUNT

Temperature Numerical Analysis of A Large Rigid-Continuous Concrete Bridge

An experimental study on the seismic performance of beam-column joints in steel frames with the effect of concrete slabs considered

Experimental study on axial compression properties of concrete filled steel tubular stub columns in varying ambient temperature

Finite Element Analysis On The Temperature Field Of Steel-Concrete Composite Joints Under Fire

TOP JOINT STUDY ON TEMPERATURE STRESS FOR SUPER-LONG SLAB-COLUMN STRUCTURE

Experiment study and refined modeling of temperature field of steel-concrete composite beam bridges

Analysis and engineering practice of temperature stress on super-long concrete structures