Abstract:Light metals are gaining increased attention due to ecological sustainability concerns and strict emission regulations. Magnesium (Mg) is one such metal that has the potential to replace high density components, which can reduce emissions through lightweighting. However, the mechanical properties of Mg alloys must be improved for them to become viable candidates for structural applications. To this end, the current study examines the effect of sonication vibrational amplitude on the microstructure and mechanical properties of AZ91E Mg alloy. The molten alloys were subjected to ultrasonic treatment at a frequency of 20 kHz, 180 s of processing time and vibrational amplitudes ranging from 1.25 to 15 μm. The resultant castings were characterized using optical microscopy, scanning electron microscopy and tensile testing. It was found that sonication with amplitudes up to 7.5 μm was able to effectively refine the secondary phases of the alloy. Similar trends were observed for grain size and yield strength. The refinement in microstructure was likely caused by the finer grain size and cavitation induced undercooling of the liquid metal. In addition, it was also noted that even the lowest level of amplitude (1.25 μm) was able to increase the density, improve the ultimate tensile strength and ductility of the castings. The tensile strength and ductility were thought to have been enhanced by ultrasonic degassing and refinement in microstructure, while the yield strength was improved through the Hall-Petch effect. The results from this study provided a basis for optimizing the sonication process and promoting its use in industry. As a result, Mg alloys improved through ultrasonic processing have the potential to replace higher density components, with consequent energy efficiency and environmental and ecological benefits.

Effect of Ultrasonic Wave on Solidified Structure and Mechanical Properties of AZ31B Magnesium Alloy

Effects of Ultrasonic Vibration on Microstructure and Properties of As-Cast and Hot Rolled AZ31 Magnesium Alloy

Three Orthogonally Arranged Ultrasounds Modulate Solidification Microstructures and Mechanical Properties for AZ91 Magnesium Alloy

Effects of Ultrasound on the Microstructures and Mechanical Properties of Cast-Rolling AZ31B Magnesium Alloy Strip

Ultrasonic Effects on Microstructure Evolution and Mechanical Properties of AZ80 Magnesium Alloy

Effects Of Ultrasound On The Microstructures And Mechanical Properties Of Cast-Rolling Az3b Magnesium Alloy Strip

Experiment research on ultrasound cast-rolling AZ31 alloy strip

Ultrasonic Solidification Mechanism and Optimized Application Performances of Ternary Mg71.5Zn26.1Y2.4 Alloy

Effect of Composite Energy-Field on Microstructure and Properties of Az31b Magnesium Roll-Casting Alloy Sheet

Improved Mechanical Performances of Dynamically Solidified Mg97.7Y1.4Al0.9 Alloy by Three Dimensional Ultrasounds

Effect of Ultrasonic Vibration and Solution Heat Treatment on Microstructures and Tensile Properties of AZ91 Alloy

Experimental Study on Twin-roll Casting Magnesium Alloy Strip

Effects of Ultrasonic Treatment on Microstructures of AZ91 Alloy

Effect of High-Intensity Ultrasonic Field on Process of Semi-Continuous Casting for Az80 Magnesium Alloy Billets

Microstructure and mechanical properties of AZ91 alloy produced with ultrasonic vibration

Effects of sonication amplitude on the microstructure and mechanical properties of AZ91E magnesium alloy

Mechanical Properties and Formability of Ultrasonic Treated Twin Roll Casting Magnesium Alloy Sheet

Effects of Varied Ultrasonic Semi-continuous Casting on Microstructure and Mechanical Properties of ZK60 Magnesium Alloy

Research of Ultrasound and Electromagnetic Field on the Microstructure of Cast-Rolling Magnesium Strip

Influence of Spatial Position of Sound Source on Dual-Frequency Ultrasound-Assisted Preparation of Magnesium Alloy

Effects of process parameters on the mechanical properties and microstructure in ultrasonic vibration-assisted warm tensile deformation of AZ31 magnesium alloy