Abstract:Three dimensional (3D) power ultrasound sources with 20 kHz frequency and 14∼22 μm amplitudes were introduced into the solidification process of AZ91 magnesium alloy, and the acoustic spectra versus temperature were synchronously examined. The measured sound pressure monotonically increased with the rise of both ultrasound dimension and amplitude, whereas the transient cavitation intensity firstly increased to its maximum under 3D ultrasound sources at 18 μm amplitude and then unexpectedly declined if further raising the amplitude to 22 μm. The grain size of primary α-Mg phase which was refined down to 16% of that under static solidification mainly depended on the transient cavitation intensity, indicating that the transient cavitation enhanced the nucleation rate by over two orders of magnitudes and dominated the grain refinement. The dislocation density within α-Mg phase increased owing to the intense vibration under semi-solid state. A more homogeneous distribution of divorced eutectic β-Mg14Al12 phase and a smaller amount of β precipitation were induced due to the grain refinement and suppressed segregation for primary α-Mg phase. The microstructural evolution improved the mechanical properties for AZ91 alloy, where its elongation rate and tensile strength were enhanced by the factors of 2.4 and 1.7, respectively. It is demonstrated that applying 3D ultrasound sources provides an effective approach to modulate solidified microstructures and enhance mechanical performances for magnesium alloy.

Effects of Ultrasonic Treatment on Microstructures of AZ91 Alloy

Ultrasonic Effects on Microstructure Evolution and Mechanical Properties of AZ80 Magnesium Alloy

Effect of Ultrasonic Vibration and Solution Heat Treatment on Microstructures and Tensile Properties of AZ91 Alloy

Effect of power ultrasound on microstructural characteristics and mechanical properties of Al 81.3 Sn 12.3 Cu 6.4 monotectic alloy

Three Orthogonally Arranged Ultrasounds Modulate Solidification Microstructures and Mechanical Properties for AZ91 Magnesium Alloy

Effect of Ultrasonic Power on Grain Refinement and Purification Processing of Az80 Alloy by Ultrasonic Treatment

Effect of ultrasonic treatment on solidification structure refinement of Mg-Al binary alloy

Structural Evolution of Al–8%Si Hypoeutectic Alloy by Ultrasonic Processing

Effect of ultrasonic treatment on microstructures and properties of hypereutectic Al-Si alloys

Effects of ultrasonic treatment on microstructure and mechanical properties of Mg-6Zn-0.5Y-2Sn alloy

Influence of High-Intensity Ultrasonic Treatment on the Phase Morphology of a Mg-9.0wt.%Al Binary Alloy

Effect of High-Intensity Ultrasonic on Solidification Structure of Mg-Ca Alloy

Microstructure and Mechanical Properties of Mg–6Zn–0.5Y Magnesium Alloy Prepared with Ultrasonic Treatment

Ultrasonic Treatment of Magnesium Alloy Melts and Its Effects on Solidification Microstructures

Ultrasonic Solidification Mechanism and Optimized Application Performances of Ternary Mg71.5Zn26.1Y2.4 Alloy

Effects of Ultrasonic Treatment on Microstructure and Mechanical Properties of 6016 Aluminium Alloy

Effects Of Ultrasonic Treatment On Microstructures Of Hypereutectic Al-23%Si Alloy

Effect of Ultrasonic Wave on Solidified Structure and Mechanical Properties of AZ31B Magnesium Alloy

Effect of Ultrasonic Treatment on Grain Refining of Solidification Microstructure of 7050 Aluminum Alloy

Effect of high-intensity ultrasonic on microstructures and grain refinement of magnesium alloy

Effects and Mechanism of Ultrasonic Irradiation on Solidification Microstructure and Mechanical Properties of Binary Tial Alloys