Abstract:Transmission characteristics of infrared hollow fiber with multi-AgI and SiO2 films are discussed. Three-dielectric-layer hollow glass fiber with SiO2/AgI/SiO2/Ag structure was fabricated for low-loss delivery of infrared laser light. The first SiO2 film on the silver layer was coated by using liquid phase coating method. A semi-inorganic polymer was used as the coating material. A smooth vitreous film was formed by the treatment of a hardener at room temperature and followed by curing treatment. For the deposition of the AgI film between the two SiO2 films, an Ag film was first plated on the SiO2 film by silver mirror reaction method. Then the iodination process was conducted to turn the silver layer into silver iodide. The second SiO2 layer was deposited on the AgI layer in the same way as the first SiO2 layer. Fabrication parameters for controlling film thicknesses, such as iodination temperature, silver mirror reaction time, and solution concentration, are clarified for depositing AgI and SiO2 films with the theoretical optimum thicknesses. By optimizing the thickness of the three dielectric layers, low-loss in the loss spectrum of SiO2/AgI/SiO2/Ag hollow glass waveguides can be obtained at the target infrared wavelengths. A method is proposed to evaluate the film thickness of AgI layer based on the positions of loss peaks and valleys in the loss spectra. Theoretical calculation for loss spectrum of SiO2/AgI/SiO2/Ag hollow glass fiber considering material dispersion of dielectric materials is also conducted. Good agreement with the measured data is demonstrated.

Transmission Characteristics of Terahertz Hollow Fiber with an Absorptive Dielectric Inner-Coating Film.

The Effect of Dielectric Absorption on the Transmission Characteristics of Terahertz Hollow Fibers

Transmission Characteristics of Elliptical Terahertz Hollow Fiber with Dielectric and Metallic Inner Coatings

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Highly Birefringent Terahertz Hollow Fiber: Design, Fabrication, and Experimental Characterization

Characterization of Dielectric-Coated Metallic Hollow Fiber with Subwavelength Diameter at Terahertz Frequency

Transmission Characteristics of Infrared Hollow Fibers with Multilayered Dielectric Inner-Coatings

Elliptical Metallic Hollow Fiber Inner-Coated with Non-Uniform Dielectric Layer.

Transmission Properties of Dielectric-Coated Hollow Optical Fibers Based on Ni-Ti Tube

Transmission properties of dielectric-coated hollow optical fibers based on silver-cladding-stainless pipe

Transmission properties of 700-m-bore hollow optical fibers based on flexible Ni-Ti tube

Fabrication and Characterization of Infrared Hollow Fiber with Multi- SiO(2) and AgI Inner-Coating Layers.

Optimal Design for Hollow Fiber Inner-Coated by Dielectric Layers with Surface Roughness

Elliptical Hollow Fiber with Inner Silver Coating for Linearly Polarized Terahertz Transmission

Fabrication of Sio2/Agi/Sio2/Ag Hollow Glass Fiber for Infrared Transmission

Fabrication and Characterization of Big-Bore Flexible Dielectric-Coated Metallic Terahertz Waveguides

Influence of Thickness of Al-Doped ZnO Films as Broadband Antireflection Coating on Teraherz Transmission

Fabrication Of 800-Mu M-Bore Hollow Optical Fibers Based On Completely Non-Fragile And Flexible Ni-Ti Tube For The Infrared

Design and Investigation of a Terahertz Hollow-Core Fiber with Double-Layer Ring Core for OAM Mode Transmission

Design and Fabrication of High-Performance Infrared Hollow Fiber for Medical Laser Power Delivery

Infrared hollow fiber with a vitreous film as the dielectric inner coating layer.