Abstract:In this work we report two designs of subwavelength fibers packaged for practical terahertz wave guiding. We describe fabrication, modeling and characterization of microstructured polymer fibers featuring a subwavelength-size core suspended in the middle of a large porous outer cladding. This design allows convenient handling of the subwavelength fibers without distorting their modal profile. Additionally, the air-tight porous cladding serves as a natural enclosure for the fiber core, thus avoiding the need for a bulky external enclosure for humidity-purged atmosphere. Fibers of 5 mm and 3 mm in outer diameters with a 150 \mu m suspended solid core and a 900 \mu m suspended porous core respectively, were obtained by utilizing a combination of drilling and stacking techniques. Characterization of the fiber optical properties and the near-field imaging of the guided modes were performed using a terahertz near-field microscopy setup. Near-field imaging of the modal profiles at the fiber output confirmed the effectively single-mode behavior of such waveguides. The suspended core fibers exhibit broadband transmission from 0.10 THz to 0.27 THz (larger core), and from 0.25 THz to 0.51 THz (smaller core). Due to the large fraction of power that is guided in the holey cladding, fiber propagation losses as low as 0.02 cm-1 are demonstrated. Low-loss guidance combined with the core isolated from environmental perturbations make these all-dielectric fibers suitable for practical terahertz imaging and sensing applications.

Highly Birefringent Terahertz Hollow Fiber: Design, Fabrication, and Experimental Characterization

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Characterization of Dielectric-Coated Metallic Hollow Fiber with Subwavelength Diameter at Terahertz Frequency

Highly birefringent polymer terahertz fiber with honeycomb cladding

Transmission Characteristics of Elliptical Terahertz Hollow Fiber with Dielectric and Metallic Inner Coatings

The Effect of Dielectric Absorption on the Transmission Characteristics of Terahertz Hollow Fibers

Elliptical Hollow Fiber with Inner Silver Coating for Linearly Polarized Terahertz Transmission

Research on Terahertz Photonic Crystal Fiber Characteristics with High Birefringence

Sector-type High Birefringence Hollow-Core Anti-Resonant Terahertz Photonic Crystal Fiber with Low Loss

Anti-Resonant Hollow-Core Fibers with High Birefringence and Low Loss for Terahertz Propagation

Transmission Characteristics of Terahertz Hollow Fiber with an Absorptive Dielectric Inner-Coating Film.

Highly Birefringent Single-Mode Suspended-Core Fiber in Terahertz Regime

Design and Investigation of a Terahertz Hollow-Core Fiber with Double-Layer Ring Core for OAM Mode Transmission

Highly Birefringent Photonic Crystal Fibers with Near-zero Flattened Dispersion for Polarization-Maintaining Terahertz Transmission

Low-loss Polarization-Maintaining THz Photonic Crystal Fiber with a Triple-Hole Core.

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

Design and Numerical Analysis of A Thz Square Porous-Core Photonic Crystal Fiber for Low Flattened Dispersion, Ultrahigh Birefringence

Simulation of a highly birefringent photonic crystal fiber in terahertz frequency region

Design and optimization of low-loss high-birefringence hollow fiber at terahertz frequency (vol 19, pg 24967, 2011)

Elliptical Metallic Hollow Fiber Inner-Coated with Non-Uniform Dielectric Layer.

Suspended core subwavelength fibers: practical designs for the low-loss terahertz guidance