Abstract:A novel type of polarization negative curvature terahertz fiber has been designed, which has a cladding region composed of two long semi-circular cladding tubes in the horizontal direction and four long semi-elliptical cladding tubes in the oblique direction. The optimal fiber dimensions are determined to investigate the internal relationship between polarization characteristics and fiber cladding structure. The transmission performances of the negative curvature fiber are investigated by varying the thickness of fiber cladding tubes and adjusting the structural characteristics of cladding tubes in different directions. Relatively good transmission performances can be obtained with a cladding tube thickness of 80 μm. The birefringence can be stably maintained at the order of 10 −4 , and the confinement loss of the x-polarized mode at 2.55 THz is 0.036 dB cm −1 . Moreover, the dispersion coefficient of the two polarized modes is stable between ±0.6 ps (THz·cm) −1 in the 2.3–2.6 THz band. The bent performance of the designed fiber at 2.52 THz is also discussed. The results show that the fiber has low bending sensitivity, and can still maintain excellent birefringence and low confinement loss in the bending state. For the y polarization, the birefringence can be basically stabilized at the order of 10 −4 within a bending radius of 10–60 cm.

Elliptical Hollow Fiber with Inner Silver Coating for Linearly Polarized Terahertz Transmission

Elliptical Metallic Hollow Fiber Inner-Coated with Non-Uniform Dielectric Layer.

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Highly Birefringent Terahertz Hollow Fiber: Design, Fabrication, and Experimental Characterization

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

Terahertz Circular Photonic Crystal Fiber

Transmission Characteristics of Elliptical Terahertz Hollow Fiber with Dielectric and Metallic Inner Coatings

Polarization dependent transmission through a symmetrical metallic grating on low-absorption polymer substrates

Terahertz transmission characteristics of double wire-grid polarizer on low-loss polyethylene substrate

Low-loss Air-Core Polarization Maintaining Terahertz Fiber

Dual Cylindrical Metallic Grating-Cladding Polymer Hollow Waveguide for Terahertz Transmission with Low Loss

Influence of cladding tube structure on transmission characteristics of negative curvature terahertz fiber

Low-loss Polarization-Maintaining THz Photonic Crystal Fiber with a Triple-Hole Core.

Polarization maintaining air-core bandgap terahertz fiber

A double-layer high-transmission terahertz linear-to-circular polarization converter

Low-loss Polarization-Maintaining Terahertz Fiber Based on Central Air Hole Movements

A Terahertz Polarizer Based on Multilayer Metal Grating Filled in Polyimide Film

High-performance terahertz polarization filter based on the anti-resonant fiber

Polarization Management of Terahertz Extraordinary Optical Transmission through Ultracompact L-Shaped Subwavelength Patterns on Metal Films

Design and Numerical Analysis of A Thz Square Porous-Core Photonic Crystal Fiber for Low Flattened Dispersion, Ultrahigh Birefringence

Linearly Polarized Third-Harmonic Generation in an Elliptical-Core Fluoride Fiber