Abstract:Hollow fiber with internal metal and dielectric coating films is one of the promising media for THz transmission. Although the dielectric layer can effectively reduce the transmission loss, it brings additional loss due to its absorption. It has been shown in mid-infrared region that the optimum thickness of the dielectric layer becomes smaller due to absorption. For terahertz hollow fibers, the film thickness of the dielectric layer become much larger and the transmission characteristics are more dependent on the dielectric absorption. The influences of dielectric absorption on the structure parameters of the dielectric-coated metallic hollow fibers are discussed. Calculation results show that the optimum refractive index of the dielectric layer, which is 1.41 for perfect transparent dielectrics, turns out to be greater. The absorption tolerance is also investigated considering the factors of inner diameter, the refractive index, and the transmission wavelength. It is shown that absorption tolerance decreases when the inner diameter becomes smaller or when the transmission wavelength becomes larger. In extreme cases of small inner-diameter or large transmission wavelength, the absorption tolerance is not existent. Because the loss of the dielectric-coated metallic hollow fiber is larger than that of metallic hollow fiber even the dielectric layer has no absorption. The calculation results are helpful to the structure design and material selection in the fabrication of terahertz hollow fibers.

Optimal Design for Hollow Fiber Inner-Coated by Dielectric Layers with Surface Roughness

A novel trilayer antireflection coating using dip-coating technique

Roughness-induced Radiation Losses in Optical Micro or Nanofibers.

Experimental investigation on liquid-phase fabrication techniques for multilayer infrared hollow fiber

Transmission Characteristics of Terahertz Hollow Fiber with an Absorptive Dielectric Inner-Coating Film.

Transmission Characteristics of Infrared Hollow Fibers with Multilayered Dielectric Inner-Coatings

Infrared hollow fiber with a vitreous film as the dielectric inner coating layer.

Fabrication Of 800-Mu M-Bore Hollow Optical Fibers Based On Completely Non-Fragile And Flexible Ni-Ti Tube For The Infrared

Transmission properties of dielectric-coated hollow optical fibers based on silver-cladding-stainless pipe

Efficient Optimal Design of Smooth Optical Freeform Surfaces Using Ray Targeting

Fabrication and Characterization of Infrared Hollow Fiber with Multi- SiO(2) and AgI Inner-Coating Layers.

The Effect of Dielectric Absorption on the Transmission Characteristics of Terahertz Hollow Fibers

Analysis of the spatial filter of a dielectric multilayer film reflective cutoff filter-combination device

Design of Multilayer Planar Film Structures for Near-Perfect Absorption in the Visible to Near-Infrared.

Transmission Properties of Dielectric-Coated Hollow Optical Fibers Based on Ni-Ti Tube

Hollow Infrared Fiber with an Inorganic Inner Coating Layer with High Durability

Improved Coating Method for Uniform Polymer Layer in Infrared Hollow Fiber

Transmission properties of 700-m-bore hollow optical fibers based on flexible Ni-Ti tube

Elliptical Metallic Hollow Fiber Inner-Coated with Non-Uniform Dielectric Layer.

Fabrication of 100-Μm-bore Hollow Fiber for Infrared Transmission

Fabrication of Hollow Optical Fiber with A Vitreous Film for Co2 Laser Light Delivery