Abstract:Ternary alloys samples with 22, 25 and 23 different compositions were prepared for determining isothermal sections at 1123, 1223 and 1373 K, respectively. The microstructures, phase constituents and phase compositions of the annealed Cu-Nb-Ni alloys were analyzed by scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) methods. Two three-phase regions, , fcc + bcc(Nb) + Nb 7 Ni 6 , and three two-phase regions, , fcc + Nb 7 Ni 6 , are determined for isothermal sections at 1123 and 1223 K. Two three-phase regions, , liquid + bcc(Nb) + Nb 7 Ni 6 , and three two-phase regions, , liquid + Nb 7 Ni 6 , are determined for isothermal sections at 1373 K. The solubilities of Cu in NbNi 3 and Nb 7 Ni 6 were determined to be ~ 9.6 at.% and ~ 11.4 at.% at 1123 K, ~ 10.8 at.% and ~ 12.4 at.% at 1223 K and ~ 11.2 at.% and ~ 12.8 at.% at 1373 K, respectively. No ternary compounds were found. Based on the experimental phase equilibria data from the literature and the present work, a thermodynamic description of the Cu-Nb-Ni system was carried out by CALPHAD method. The substitutional solution model and sublattice model were employed to describe the solution phases and intermediate phases, respectively. A set of self-consistent thermodynamic parameters of the Cu-Nb-Ni system was conclusively obtained. Most of the reliable experimental data were reproduced by the present thermodynamic modeling.

Thermodynamic Assessments of the Cu-Mn-X (X : Fe, Co) Systems

Thermodynamic Re-Assessment of the Mn-La Binary System

Thermodynamic Assessment of the Fe–Mn–Ni System and Diffusion Mobility of Its Face-Centered Cubic Phase

Phase Equilibria of the Cu-in System II: Thermodynamic Assessment and Calculation of Phase Diagram

Thermodynamic description and simulation of solidification microstructures in the Cu–Mg–Zn system

Thermodynamic Calculation of Phase Equilibria in the C-Mo-Zr System

Thermodynamic Description of Phase Equilibria in the C–Mo–W–N Quaternary System

Thermodynamic Description of the Cu–Sn System

Experimental Investigation and Thermodynamic Calculations of the Co-Fe-Ti System

Experimental Investigation and Thermodynamic Assessment of Phase Equilibria at the Ti-Mn side in the Ti-Mn-Mo Ternary System

Thermodynamic Descriptions of the Cu–Zn System

Critical assessment of Co-Cu phase diagram from first-principles calculations

Thermodynamic Reassessment of the Binary Cu-Sn, Cu-P, and Sn-P and Ternary Cu-Sn-P Systems

Application of the Molecular Interaction Volume Model for Calculating Activities of Elements in Ferromanganese Alloys: Mn-C, Mn-Fe, Fe-C, and Mn-Fe-C Systems

Experimental investigation and thermodynamic modeling of the ternary Ti–Fe–Mn system for hydrogen storage applications

Thermo-mechanical fedamo based calculations of hea (Fe-Ni-Cx (X=0.3-0.5) ternary alloys system using Calphad method

Critical Evaluation and Thermodynamic Modeling of the Ag-X (x=mn, Y, Sr) Binary Systems

First-Principles Study of Mechanical and Thermodynamic Properties of Binary and Ternary CoX (X = W and Mo) Intermetallic Compounds

Phase equilibria, crystal structure of δ1-MnZn9 and thermodynamic re-assessment of the Zn-Mn system

Solidified microstructure and Phase equilibria of the Cu–Cr–X (X=Mg, Y) ternary systems

Experimental Investigation of Isothermal Sections and Thermodynamic Modeling on the Cu-Nb-Ni System