Abstract:The C–Hf–Ti, C–Hf–W and C–Hf–Ti–W systems have been assessed by means of the CALPHAD (CALculation of PHAse Diagram) approach. All of the experimental phase diagram and thermodynamic data available from the literature are critically reviewed. According to the available experimental data, no ternary or quaternary compound has been found in these systems. The liquid is modeled as a substitutional solution phase, while the solid solution phases including βHf, αHf, βTi, αTi, W, HfC1-x, TiC1-x, WC1-x, WC, W2C and HfW2 are described by sublattice models. The modeling of C–Hf–Ti and C–Hf–W systems covers the whole composition range. A set of self-consistent thermodynamic parameters for the C–Hf–Ti and C–Hf–W systems are then obtained. Comprehensive comparisons between the calculated and experimental data show that the experimental information is satisfactorily accounted for by the present thermodynamic description. The liquidus projection and reaction scheme of the C–Hf–Ti and C–Hf–W systems are generated by using the present thermodynamic parameters. Due to limited experimental data, the simple Hf–Ti–W system is extrapolated from its sub-binary systems. Based on the present work and the previous assessment of the C–Ti–W system, a thermodynamic description of the quaternary C–Hf–Ti–W system is extrapolated, and the experimental phase equilibria can also be well reproduced by the present thermodynamic modeling. For the first time, the miscibility gap of the quaternary cubic carbides is calculated in the quaternary C–Hf–Ti–W system. A high potential in industrial applications such as in bulk cemented carbide, cermet cutting tools and hard-coatings is discussed mainly in terms of the miscibility gap.

Experimental Investigation and Thermodynamic Calculations of the Co-Fe-Ti System

Experimental Investigation and Thermodynamic Description of the Fe–Ta–Ti System

Thermodynamic Description and Simulation of Solidification Microstructure in the Co-Ti System

Experimental Investigation and Thermodynamic Modelling of the Fe-Ni-Ta System

A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments

Thermodynamic and diffusion kinetic studies of the Co-Al–Fe system

The stability and homogeneity range of the TCP phases in the Co-Fe-Ta system

Thermodynamic assessment of the Co–Fe–Ni system and diffusion study of its fcc phase

A thermodynamic description of the C–Hf–Ta system over the whole composition and temperature ranges

Thermodynamic Assessment of the Fe–Mn–Ni System and Diffusion Mobility of Its Face-Centered Cubic Phase

Phase equilibria and thermodynamics assessment of the Co–Fe–Nb ternary system

Experimental determination of isothermal sections for the Co-rich corner of the Co-Cr-Ti system at 800 and 900 °C

Solidification Behavior of Dy-Tb-Fe Alloys through Experimental Study and Thermodynamic Calculation

Thermo-mechanical fedamo based calculations of hea (Fe-Ni-Cx (X=0.3-0.5) ternary alloys system using Calphad method

Thermodynamic Description and Quaternary Miscibility Gap of the C–Hf–Ti–W System

Thermodynamic analysis of the Fe–Ti–P ternary system by incorporating first-principles calculations into the CALPHAD approach

THERMODYNAMIC ASSESSMENT OF THE Fe-Nb-Si SYSTEM

Experimental Investigation and Thermodynamic Assessment of Phase Equilibria in the Al-Ta-V Ternary System

Experimental Investigation and Thermodynamic Assessment of Phase Equilibria at the Ti-Mn side in the Ti-Mn-Mo Ternary System

Experimental Investigation of Phase Equilibria in the Co-Ta-Si Ternary System

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system