Abstract:The bentonite is commonly used mixed with soils for groundwater retention and waste contaminant facilities. The incorporation of bentonite could significantly reduce hydraulic conductivity. In this study, the effects of bentonite content, hydration time and effective confining pressure on the static properties of a sand–bentonite mixture were studied using experimental and numerical methods. Firstly, a large number of drainage static triaxial tests on the sand–bentonite mixture with various bentonite contents were conducted. The test results show that the increase in bentonite content and hydration time leads to a slight decrease in shear strength and initial tangent modulus of the sand–bentonite mixture. The presence of bentonite reduces the shear shrinkage and dilatancy trend of the mixture. The cohesion of the mixture increases with the increase in bentonite content and hydration time, but the internal friction angle decreases correspondingly. The hydration of bentonite on the surface of sand particles changes the contact form between particles. The bentonite slurry between pores of the sand skeleton also affects the mechanical behavior of the sand–bentonite mixture. Then, a series of 3D discrete element models were established for numerical simulations of drainage static triaxial tests. The numerical model parameters were calibrated by experimental results. The meso-mechanism of bentonite content affecting the mechanical behavior was revealed according to the contact force distribution between particles. The research results are helpful to understand further the mechanism of bentonite on the mechanical properties of the sand–bentonite mixture.

Influence of Bentonite Dosage on Strength of Porous Ceramic with Quartz Sand

Experimental Study on Thermal Conductivity of Mixed Materials of Sand and Bentonite

Effect of Ceramic Powder on the Performance of Coating

INFLUENCE OF SINTERING PROCESS ON PROPERTY OF POROUS CERAMICS FROM QUARTZ SAND

Effects of Bentonite on Pore Structure and Permeability of Cement Mortar

Effect of bentonite content on the suspension stability of a glaze slurry and final enamel performance

The Effect of SiO2 Addition on Phase and Microstructure of Porous Silica Ceramic

Effect of Diatomite Additive on the Mechanical and Dielectric Properties of Porous SiO2-Si3N4 Composite Ceramics

Characterization of Porous Silicon Nitride Ceramics Using Bentonite As Binder and Sintering Additive

Research on the Characterization of A Porcelainised Material Fabricated by Adding A Small Amount of Anorthite Chamotte

Effects of Β-Si3n4 Seeds Addition on Microstructure and Mechanical Properties of Porous Si3N4 Ceramics

Effect of Sintering Additive Content on Mechanical and Dielectric Properties of Porous Si3N4/BN Composite Ceramics

Effect of Bentonite Content and Hydration Time on Mechanical Properties of Sand–Bentonite Mixture

Effect of Pure Β-Si3n4powder on Microstructure and Mechanical Properties of Porous Si3N4ceramics

Study on Microstructure and Mechanical Properties of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Effect of silicon carbide additive on microstructure and properties of porcelain ceramics

Effects of Solid Loading in Initial Slurry on Microstructure and Properties of Porous Mullite Ceramics

Influences of Bentonite Modification Methods on the Physical and Chemical Properties of Bentonite

Effects of Organic Additives on Microstructure and Mechanical Properties of Porous Si 3 N 4 Ceramics

Effects of the Starting Powders on Microstructure and Properties of Porous Silica Ceramics