Abstract:In this research, the effect of promoter addition and its type on the catalytic performance and morphology properties of bimetallic Ni–Co catalysts on the novel hollow Al 2 O 3 support was investigated in the dry reforming of methane (DRM) process. The response surface method (RSM) based on the optimal custom model was employed for maximizing CH 4 and CO 2 conversions, as well as H 2 and CO yield. Four independent variables including Co to Ni mass ratio (0, 0.5, 1), DRM temperature (600, 650, 700 °C), CH 4 /CO 2 molar ratio (1, 1.5, 2), and catalyst type (without promoter, with Mg or Y promoter) were selected for this purpose. Among three suggested optimized catalysts by the design expert, the yttrium-promoted one with 1 Co/Ni mass ratio (1Ni–Co–Y/Al) depicted the highest CH 4 conversion of 86.50 %, CO 2 conversion of 92.00 %, H 2 yield of 85.11 %, and CO yield of 93.54 % at lower temperature of 679 °C and equal CH 4 /CO 2 mole ratio of 1. The structural characterizations confirmed that the high activity of 1Ni–Co–Y/Al could be due to the better dispersed active sites and higher surface area of this catalyst compared with un-promoted and Mg-promoted samples. The time-on-stream performance of optimized catalysts at their optimized conditions was also compared experimentally, results of which showed more stability and activity of the Y-promoted sample during 12 h DRM reaction. The TGA, EDX, XRD, FESEM, and N 2 physisorption techniques demonstrated the lower structural change and deposited carbon on the 1Ni–Co–Y/Al surface after reaction, which may be because of higher oxygen storage capacity (OSC) of this catalyst.

Effect of Promoter Mg on Ni/γ-Al_2O_3 Catalyst for Methane Autothermal Reforming

Effects of Promoters and Preparation Procedures on Reforming of Methane with Carbon Dioxide over Ni/Al2O3 Catalyst

Ni/x%Nb2O5/Al2O3 Catalysts Prepared via Coprecipitation-Wet Impregnation Method for Methane Steam Reforming

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: II . Effect of basic promoters

Promotional effect of magnesium oxide for a stable nickel-based catalyst in dry reforming of methane

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

The performances of Ni–MgO@γ-Al2O3 for steam methane reforming prepared by freeze-drying technology

Effect of Formation of NiO-MgO Solid Solution on Activity and Stability of Ni/MgO-AN for CO2 Reforming of Methane

Meso-porous Ni/Mg/Al catalysts for methane reforming with CO2

Synthesis, Characterization and Catalytic Performance of MgO-coated Ni/SBA-15 Catalysts for Methane Dry Reforming to Syngas and Hydrogen

Ordered mesoporous Ni–Mg–Al2O3 as an effective catalyst for CO2 reforming of CH4

Highly dispersed Ni/MgO-mSiO2 catalysts with excellent activity and stability for dry reforming of methane

Dry reforming of methane over nickel catalysts supported on magnesium aluminate spinels

Influence of Mn, Mg, Ce and P promoters on Ni-X/Al2O3 catalysts for dry reforming of methane

Effect of CeO2 on the catalytic performance of Ni/Al2O3 for autothermal reforming of methane

Role of promoter on the catalytic activity of novel hollow bimetallic Ni–Co/Al 2 O 3 catalyst in the dry reforming of methane process: Optimization using response surface methodology

Durable Ni/Mgo Catalysts For Co2 Reforming Of Methane: Activity And Metal-Support Interaction

Promoted Nickel–Cobalt Bimetallic Catalysts for Biogas Reforming

γ-Al 2 O 3 sacrificial template method for preparing flower-like Ni–Mg–Al catalysts for dry reforming of methane

High Performance of Mg–La Mixed Oxides Supported Ni Catalysts for Dry Reforming of Methane: the Effect of Crystal Structure

Carbon dioxide reforming of methane over MgO-promoted Ni/SiO2 catalysts with tunable Ni particle size