Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

High Performance of Mg–La Mixed Oxides Supported Ni Catalysts for Dry Reforming of Methane: the Effect of Crystal Structure

A highly active Ni catalyst supported on Mg-substituted LaAlO3 for carbon dioxide reforming of methane

Durable Ni/Mgo Catalysts For Co2 Reforming Of Methane: Activity And Metal-Support Interaction

Highly dispersed Ni/MgO-mSiO2 catalysts with excellent activity and stability for dry reforming of methane

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Synthesis, Characterization and Catalytic Performance of MgO-coated Ni/SBA-15 Catalysts for Methane Dry Reforming to Syngas and Hydrogen

The Ni Catalyst Supported on the FSP-made Transition Metal (Co, Mn, Cu or Zn) Doped La2O3 Material for the Dry Reforming of Methane

Development of Active and Stable Low Nickel Content Catalysts for Dry Reforming of Methane

Dry reforming of methane over nickel catalysts supported on magnesium aluminate spinels

Revolutionizing CH4-CO2 reforming: Resilient La2O3-Ni@MgAl2O4 catalyst with dual-function synergy

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Enhancing Coke Resistance of Mg1–xNixAl2O4 Catalysts for Dry Reforming of Methane Via a Doping‐Segregation Strategy

Highly dispersed Ni/Al2O3 catalysts for dry reforming of methane prepared by alkaline-induced adsorption process

Methane dry reforming over nickel-based catalysts: insight into the support effect and reaction kinetics

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Lattice Strained Ni-Co alloy as a High-Performance Catalyst for Catalytic Dry Reforming of Methane

Highly Active and Thermostable Submonolayer La(NiCo)O Δ Catalyst Stabilized by a Perovskite LaCrO 3 Support

Ni/Al2O3-La2O3 catalysts synthesized by a one-step polymerization method applied to the dry reforming of methane: effect of precursor structures of nickel, perovskite and spinel

Ordered mesoporous Ni-La2O3/Al2O3 catalysts towards efficient plasma-assisted dry reforming of methane