Abstract:To study the law that governs the complex movements of the mechanism in the process of automatic weapon operation, the velocity tracking test technology of photon Doppler velocimetry is introduced to accurately measure velocity, displacement and acceleration, on the condition that there are long displacement and rapid velocity change. In the traditional way, out of interference signal time-frequency (TF) transformation draws TF distribution, and then by modulus maxima frequency extraction, comes to the law of velocity change. Due to the influence resulting from the change of fundamental signal as well as that of light intensity signal in the test, based on the TF distribution obtained by TF transformation, the traditional modulus maxima frequency extraction can extract frequency signals, but they show abnormal sudden changes at some moments, making the velocity discontinuous, unsmooth and unreal, which brings obvious errors to the subsequent calculation of acceleration and accurate displacement. Addressing the above-mentioned problems, this paper proposes a ridge extracting correction algorithm based on modulus maxima frequency extraction; this method, based on a large number of experiments where rodless cylinders are used to simulate the motion of a gun automatic mechanism, conducts a detailed calculation and analysis of the experimental results. A comparison of the two algorithms’ processing results, in terms of the speed, displacement and acceleration, suggests that the ridge extracting correction algorithm successfully corrects the frequency selection error, which draws a more continuous and, therefore, effective curve of the velocity change, and by so doing, the error of the displacement test (within 1.36 m displacement) is reduced from more than 3.6% to less than 0.58%, and the uncertainty dropped 97.07%. All these show that the accurate measurement of velocity, displacement and acceleration, with sudden and rapid velocity changes considered, is realized successfully.

The Velocity Testing Technology and Experiment Research of Gun Muzzle Velocity Based on Laser Target

A High-Precision Laser Displacement Measurement System

NON-CONTACT MEASUREMENT TECHNIQUE FOR DYNAMIC RADIAL DEFORMATION OF EXPLOSION CONTAINMENT VESSELS

Accuracy Analysis for Digital Boresighting of Aircraft Gun

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Preliminary Analysis on Muzzle Velocity Measurement in Electromagnetic Launch

Cyclin‐D1 expression in node‐positive (N+) and node‐negative (N−) infiltrating human mammary carcinomas

Analysis of initial velocity measurement methods o f pro jectile muzzle

Launch Dynamics Analysis of a Grenade Machine Gun with High Muzzle Velocity Based on the Soft Recoil Technology

Experimental study of recoil reduction by reverse jet gas for automatic weapon

In-Bore Dynamic Measurement and Mechanism Analysis of Multi-Physics Environment for Electromagnetic Railguns

Non contact shock-wave velocity testing based on optical-fiber interference system

Study on Micro Recoil Mechanism of the Weapon with a Nozzle and Two Chambers Separated by a Partition

Super-High Initial Velocity Mechanism of Bullet Propulsion with Adaptive Pressure-Maintaining Chamber

Mining sarcomas by proteomics approaches: Ewing sarcoma on the spotlight.

Numerical Simulation of the Two-phase Flow of a Constant-pressure Rear-spray Low Recoil Weapon with Two Chambers

Velocity Measurement Based on Laser Doppler Effect

Technique of Floating Tandem Chamber Shooting Ultrahigh Velocity Cartridge

Light Curtain Target Point Coordinate Measuring Method

Vibration reduction performance of an arc tripod structure for firing accuracy improvement

Reconstruction of Velocity Curve in Long Stroke and High Dynamic Range Laser Interferometry