Abstract:Acceleration measurement plays an important role in a variety of fields in science and engineering. In particular, the accurate, continuous and non-contact recording of the shock acceleration profiles of the free target surfaces is considered as a critical technique in shock physics. Various kinds of optical interferometers have been developed to monitor the motion of the surfaces of shocked targets since the 1960s, for instance, the velocity interferometer system for any reflector, the fiber optic accelerometer, the photonic Doppler velocimetry system and the displacement interferometer. However, most of such systems rely on the coherent quasi-monochromatic illumination and discrete optic elements, which are costly in setting-up and maintenance. In 1996, L. Levin et al reported an interferometric fiber-optic Doppler velocimeter with high-dynamic range, in which fiber-coupled components were used to replace the discrete optic elements. However, the fringe visibility of the Levin's system is low because of the coupled components, which greatly limits the reliability and accuracy in the shock measurement. In this paper, a compact all-fiber interferometer system for measuring the shock acceleration is developed and tested. The advantage of the system is that not only removes the non-interfering light and enhances the fringe visibility, but also reduces polarization induced signal fading and the polarization induced phase shift. Moreover, it also does not require a source of long coherence length. The system bases entirely on single-mode fiber optics and mainly consists of a polarization beam splitter, a faraday rotator, a depolarizer and a 3x3 single-mode fiber coupler which work at 1310 nm wavelength. The optical systems of the interferometer are described and the experimental results compared with a shock acceleration calibration system with a pneumatic exciter (PneuShock(TM) Model 9525C by The Modal Shop) are reported. In the shock acceleration test, the interferometer system measured shock acceleration with peak accelerations of similar to 100,000 m/s(2) and the durations of similar to 0.2 ms which are conformed to the results of the shock acceleration calibration system. The measured relative error of the acceleration is within 3%.

Non contact shock-wave velocity testing based on optical-fiber interference system

Calibration and Correction of Particle Velocity Signals in Optical Fiber Measurement

Design and realization for FOG pure lag test system

NON-CONTACT MEASUREMENT TECHNIQUE FOR DYNAMIC RADIAL DEFORMATION OF EXPLOSION CONTAINMENT VESSELS

Actively stabilized optical fiber interferometry technique for online/in-process surface measurement.

Measurement Technology of Stress Wave Particle Velocity in Solid Medium Based on Optical Fiber Coated Probe

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Near Common-Path Optical Fiber Interferometer for Potentially Fast On-Line Microscale-Nanoscale Surface Measurement

Compact All-Fiber Interferometer System for Shock Acceleration Measurement

Experimental study on a novel all-fiber vibration velocity interferometer

Application of Fiber Optic Interferometer System in Flyer Plates Velocity Measuring

A Novel All-Fiber Velocity Measurement System with High Fringe Contrast

All Fiber Optical Velocity Interferometer Research

All-fiber Velocity Measurement System Based on Receiving Diffuse Reflection by Multiple Fibers

Optical fiber vortex-shedding flow measurement based on white-light interference

Measurement of dynamic deformation during shock loading using a fiber-optic loop-sensor

Optical-fiber Vortex-Shedding Flowmeter Based on White-Light Interference

All-Fiber Velocity Interferometer for Multipoint Measurement

Physical quantities measurement by using the fiber optic sensor in the pendulum ball collision

Dynamic measurement of ballistic impact using an optical fibre sensor

The Side-Release Method Measures the High-Pressure Sound Velocity of Iron Using Line-Spatially Resolved DISAR