Abstract:In order to study the numerical variation law of the internal ballistic overload of the guided projectile under different coated mixed charge structures, and to provide a basis for the development of a new type of high muzzle velocity and low overload propellant charge design, taking a large-caliber suppressed artillery as the simulation object, the layered combustion model of the coated propellant was established by using the one-dimensional two-phase flow theory, and the lace 37-hole nitroguanidine propellant was used as the main charge (MC) and lace 19-hole nitroguanidine coated propellant as auxiliary charge (B). The effects of mixed charges with different charge mass, different mixing ratios and different coating layer thicknesses on the internal ballistic overload value were studied by simulation calculation. The research results show that the increase of the total charge mass will increase the overload impact of the guided projectile and the muzzle velocity of the projectile ; with the increase of the thickness of the coating layer and the proportion of the coated propellant in the mixed charge ratios, the longitudinal overload and the muzzle velocity of the projectile in the chamber of the guided projectile will be decreased to a certain extent and the time point when the maximum overload occurs will be delayed; under the structure of the coated mixed charge, the influence of the proportion of coated propellant in different mixed charge ratios and the coating layer thickness of coated propellant on the launch overload of the guided projectile is greater than the muzzle velocity of the projectile, and the effect of reducing the firing overload in the chamber by increasing the proportion of coated propellant in different mixed charge ratios is the most significant.

Study on Micro Recoil Mechanism of the Weapon with a Nozzle and Two Chambers Separated by a Partition

Numerical Simulation of the Two-phase Flow of a Constant-pressure Rear-spray Low Recoil Weapon with Two Chambers

Recoil Reduction Design of Gas-Controlled Side-Jet Gun Based on Bifurcated Two-Phase Flow Model

Launch Dynamics Analysis of a Grenade Machine Gun with High Muzzle Velocity Based on the Soft Recoil Technology

Recoil Reduction Method of Gun with Side to Rear Jet Controlled by Piston Motion

Experimental study of recoil reduction by reverse jet gas for automatic weapon

Recoil reduction method of gun with lateral nozzle controlled by electromagnetic valve

Dynamic Modeling and Simulation of Gatling Gun with Muzzle Assistant-Rotating and Recoil Absorber

Dual Nozzle Weapon Power Couple Vibration Controller with Delayed Rear Nozzle

Super-High Initial Velocity Mechanism of Bullet Propulsion with Adaptive Pressure-Maintaining Chamber

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Modelling and simulation analysis of man-gun systems with prone position and support

Numerical Investigation on the Flow Field of Muzzle Decompression Device for the Barrel Recoil Gun

Research on Vibration Control of Paired Inclined Nozzles Dynamic Coupled Tubes

A calculation method of interior ballistic two-phase flow considering the recoil of gun barrel

Interior ballistic two-phase flow model and its calculation for a mixed charge structure

Experimental study on the physical mechanism of pulse noise in the tail of a recoilless gun

Research on Influence of Muzzle Brake Efficiency on Firing Density of Gatling Gun

Numerical simulation research of inner ballistic overload of guided projectile based on coated mixed charge

Design and Dynamic Characteristics of a Double-Layer Permanent-Magnet Buffer under Intensive Impact Load

Application of High Kinetic Energy Buffer Control Technology after Free Recoil