Abstract:Abstract Purpose Recoil length minimization is always been a top concern in various structural, industrial, and defence applications. The traditional passive recoil system is not able to respond quickly to the changes in the impact force. These limitations can be overcome by introducing a semi-active recoil system, which comprises an intelligent fluid damper. Design, methodology, and approach The electrorheological (ER) fluid, which responds to the applied electric field and exhibits high yield strength, will be a proper damper for the recoil system. An ER damper can bring back the vibrating system to its equilibrium in a brief period. In this article, the general design procedure of an ER fluid semi-active damper has been developed, which is suitable for a recoil system. The equations of damping forces (viscous, quadratic, and ER) are modified in terms of geometric parameter, namely the piston diameter ( D P ), which can be selected to obtain the desired dynamic range (greater than two) and optimum damping force. With the MATLAB software, the damper and spring specifications are fixed to meet the required conditions, viz. the dynamic range should be greater than two, and the total damping and spring force should counter-recoil the system. Findings Results obtained for a case study of gunfire conclude that the recoil system developed using design specifications exhibits desired performance with maximum recoil of 75.59 mm at 80°, angle of elevation, which is within the allowable range of 150 mm. It is shown that the rate of firing can be increased by decreasing the recoil length. Originality and value The novel procedure for the design of ER damper outlined in this work will be helpful for any recoil length minimization problem.

Recoil reduction method of gun with lateral nozzle controlled by electromagnetic valve

Recoil Reduction Method of Gun with Side to Rear Jet Controlled by Piston Motion

Recoil Reduction Design of Gas-Controlled Side-Jet Gun Based on Bifurcated Two-Phase Flow Model

Study on Micro Recoil Mechanism of the Weapon with a Nozzle and Two Chambers Separated by a Partition

Experimental study of recoil reduction by reverse jet gas for automatic weapon

Numerical Simulation of the Two-phase Flow of a Constant-pressure Rear-spray Low Recoil Weapon with Two Chambers

Dual Nozzle Weapon Power Couple Vibration Controller with Delayed Rear Nozzle

Dynamic Modeling and Simulation of Gatling Gun with Muzzle Assistant-Rotating and Recoil Absorber

Research on Vibration Control of Paired Inclined Nozzles Dynamic Coupled Tubes

Launch Dynamics Analysis of a Grenade Machine Gun with High Muzzle Velocity Based on the Soft Recoil Technology

Numerical Investigation on the Flow Field of Muzzle Decompression Device for the Barrel Recoil Gun

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Mathematical Modeling and Simulation of Pneumatic Nail Gun

Experimental study on the physical mechanism of pulse noise in the tail of a recoilless gun

Study on Low Recoil Floating Technology of Large-caliber Machine Gun

High-efficiency and low-hazard artillery recoil reduction technology based on barrel gas reflection

Research on Performance Simulation of Recoil Mechanism Based on Computational Fluid Dynamics

Super-High Initial Velocity Mechanism of Bullet Propulsion with Adaptive Pressure-Maintaining Chamber

Effect of the Artillery Recoil Movement on Muzzle Flow Field

Research on Influence of Muzzle Brake Efficiency on Firing Density of Gatling Gun

Design of ER damper for recoil length minimization: A case study on gun recoil system