Experimental study on the physical mechanism of pulse noise in the tail of a recoilless gun
Zhonghui Jiang,Gang Tao,Zhiyu Li,Peng Wen
DOI: https://doi.org/10.1177/10775463241246882
2024-04-26
JVC/Journal of Vibration and Control
Abstract:Journal of Vibration and Control, Ahead of Print. During the firing process of a recoilless gun, there is a high-intensity pulse noise phenomenon in its rear breech area. In order to obtain the physical mechanism of the pulse noise formation, this article designed experiments and used high-speed cameras and overpressure sensors to discover a "three peaks" phenomenon in the pulse noise at the shooter's position. Using resistance strain sensors, the changes of strain with time in the chamber and nozzle expansion section of the recoilless gun during the firing process were recorded. By comparing the micro-strain data and overpressure data, the shock waves at the shooter's position can be categorized into two types: internal shock waves and external shock waves. Internally, the opening of the blocking sheet initiates the formation of the initial shock wave, followed by the formation of a second pressure wave within the combustion chamber. The peak-to-peak interval between these two shock waves is nearly fixed, and the ratio of the dual peaks increases with the distance of the measurement position. The third shock wave forms externally to the nozzle, induced by the explosion of unburned propellant. As the weapon's distance from the ground increases, the peak values of the overpressure data decrease, and the waveform of this explosion-induced shock wave transitions from a single-peak phenomenon to a double-peak phenomenon. This study can provide a reference for the study of the potential risk of injury to operators using single soldier recoilless guns and similar weapons.