Abstract:For the research on real-time accurate testing technology for the explosion point spatial coordinate of munitions, its currently commonly used methods such as acoustic–electric detection or high-speed imaging are limited by the field conditions, response rate, cost, and other factors. In this paper, a method of spatial coordinate testing for the explosion point based on a 2D PSD (position-sensitive detector) intersection is proposed, which has the advantages of a faster response, better real-time performance, and a lower cost. Firstly, a mathematical model of the spatial coordinate testing system was constructed, and an error propagation model for structural parameters was developed. The influence of the position of the optical axes' intersection as well as the azimuth angle and pitch angle on the test accuracy of the system was simulated and analyzed, thus obtaining the distribution and variation trend of the overall error propagation coefficient of the system. Finally, experiments were designed to obtain the test error of the system for validation. The results show that the system test accuracy is high when the azimuth angle is 20°–50°, the overall error propagation coefficient does not exceed 48.80, and the average test error is 56.17 mm. When the pitch angle is −2.5°–2.5°, the system has a higher test accuracy, with the overall error propagation coefficient not exceeding 44.82, and the average test error is 41.87 mm. The test accuracy of the system is higher when the position of the optical axes' intersection is chosen to make sure that explosion points fall in the region of the negative half-axis of the Zw-axis of the world coordinate system, with an overall error propagation coefficient of less than 44.78 and an average test error of 73.38 mm. It is shown that a reasonable selection of system structure parameters can significantly improve the system test accuracy and optimize the system deployment mode under the long-distance field conditions so as to improve the deployment efficiency.

Light Curtain Target Point Coordinate Measuring Method

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Measuring Straightness Method with Common Path Compensation for Laser Drift

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Accuracy Analysis for Digital Boresighting of Aircraft Gun

Study on Measurement of Impact Point Coordinates with the Combination of Acoustic Array and Optical Detection

Study Of The Bullet Position Measuring Model With Six Light Screens

High-precision velocity measuring system for projectiles based on retroreflective laser screen

Design and Detection Calculation Model of Laser Photoelectric Detection Target With Array Lens and High-Power Line Laser

Study on testing firing speed of light weapon using virtual target measurement

Measurement principle of acoustic target with two equilateral triangle array

Laser Collimation Method Based on Differential Compensating Beam Drift

Optimized Laser Beam Widths Meter Calibration System: Precisely Positioning of Detector Measurement Plane

Study on Laser Parameter Measurement System Based on Cone-Arranged Fibers and CCD Camera

An improved infrared velocity measurement system with light-screen target

A high-accuracy measurement method for shield tail clearance based on line structured light

Error Analysis and Optimization of Structural Parameters of Spatial Coordinate Testing System Based on Position-Sensitive Detector

A Photoelectric Target Measurement System Based On Pc And Microchip

Sea Fall Point Measurement Method Based on Cone Angle Intersection

A Data Processing Method Based on Tracking Light Spot for the Laser Differential Confocal Component Parameters Measurement System

Laser Spots Projection Measurement Based on Monocular CCD Camera