Abstract:The increasing use of natural gas as an efficient, reliable, affordable, and cleaner energy source, compared with other fossil fuels, has brought the catalytic CH4 complete oxidation reaction into the spotlight as a simple and economic way to control the amount of unconverted methane escaping into the atmosphere. CH4 emissions are a major contributor to the ‘greenhouse effect’, and therefore, they need to be effectively reduced. Catalytic CH4 oxidation is a promising method that can be used for this purpose. Detailed studies of the activity, oxidative thermal aging, and the time-on-stream (TOS) stability of pristine La1−xSrxMnO3 perovskites (LSXM; X = % substitution of La with Sr = 0, 30, 50 and 70%) and iridium-loaded Ir/La1−xSrxMnO3 (Ir/LSXM) perovskite catalysts were conducted in a temperature range of 400–970 °C to achieve complete methane oxidation under excess oxygen (lean) conditions. The effect of X on the properties of the perovskites, and thus, their catalytic performance during heating/cooling cycles, was studied using samples that were subjected to various pretreatment conditions in order to gain an in-depth understanding of the structure–activity/stability correlations. Large (up to ca. 300 °C in terms of T50) inverted volcano-type differences in catalytic activity were found as a function of X, with the most active catalysts being those where X = 0%, and the least active were those where X = 50%. Inverse hysteresis phenomena (steady-state rate multiplicities) were revealed in heating/cooling cycles under reaction conditions, the occurrence of which was found to depend strongly on the employed catalyst pre-treatment (pre-reduction or pre-oxidation), while their shape and the loop amplitude were found to depend on X and the presence of Ir. All findings were consistently interpreted, which involved a two-term mechanistic model that utilized the synergy of Eley–Rideal and Mars–van Krevelen kinetics.

Methane oxidation to synthesis gas using lattice oxygen in La1−xSrxFeO3 perovskite oxides instead of molecular oxygen

Syngas Production by Catalytic Partial Oxidation of Methane over (la0.7a0.3)bo3 (A = Ba, Ca, Mg, Sr, and B = Cr or Fe) Perovskite Oxides for Portable Fuel Cell Applications

Effects of Oxygen Mobility in La–Fe-Based Perovskites on the Catalytic Activity and Selectivity of Methane Oxidation

Methane reforming to syngas over LaNi x Fe 1−x O 3 (0≤ x ≤1) mixed-oxide perovskites in the presence of CO 2 and O 2

Oxygen desorption and oxidation-reduction kinetics with methane and carbon monoxide over perovskite type metal oxide catalysts

Enhanced Activity of La1-xMnCuxO3 Perovskite Oxides for Chemical Looping Steam Methane Reforming

Evaluation of Fe Substitution in Perovskite LaMnO3 for the Production of High Purity Syngas and Hydrogen

Selective Catalytic Reduction ofNOx by Methane over La(1-x)SrxMnO3 Perovskites

Enhancing electrochemical methane coupling in solid oxide cells by tuning oxygen species in the catalyst

Enhanced performance of LaFeO3 oxygen carriers by NiO for chemical looping partial oxidation of methane

Oxygen vacancies engineering of Fe doped LaCoO3 perovskite catalysts for efficient H2S selective oxidation

Pseudo core-shell LaCoO3@MgO perovskite oxides for high performance methane catalytic oxidation

Tailoring Catalytic and Oxygen Release Capability in LaFe1–xNixO3 to Intensify Chemical Looping Reactions at Medium Temperatures

Methane Catalytic Combustion under Lean Conditions over Pristine and Ir-Loaded La1−xSrxMnO3 Perovskites: Efficiency, Hysteresis, and Time-on-Stream and Thermal Aging Stabilities

Direct synthesis of methane from CO2/H2O in an oxygen-ion conducting solid oxide electrolyser

Oxygen Vacancy-Mediated Selective H<sub>2</sub>S Oxidation over Co-Doped LaFe<sub>x</sub>Co<sub>1-x</sub>O<sub>3</sub> Perovskite

Chemical Looping Conversion of Methane via Fe2O3-LaFeO3 Calcined from LaFe-MOF Precursor

Catalytic combustion of methane over various perovskite-type oxides

Chemical-looping Reforming of Methane over La-Mn-Fe-O Oxygen Carriers: Effect of Calcination Temperature

Oxygen activity regulation over LaNiO 3 perovskites by Ti substitution for chemical looping partial oxidation of methane

Oxygen Activity Tuning via FeO 6 Octahedral Tilting in Perovskite Ferrites for Chemical Looping Dry Reforming of Methane