Abstract:This work investigates the possibility of using LaMn0.7Fe0.3O3.15@mSiO(2) as oxygen carriers for chemical looping combustion (CLC). CLC is a new combustion technique with inherent separation of CO, from atmospheric N-2. LaMn0.7Fe0.3O3.15@mSiO(2) core shell materials were prepared by coating a layer of mesostructured silica around the agglomerated perovskite particles. The oxygen carriers were characterized using different methods, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 sorption, hydrogen temperature-programmed reduction (H-2-TPR), and temperature-programmed desorption of oxygen (TPD-O-2). The reactivity and stability of the carrier materials were tested in a special reactor, allowing for short contact time between the fluidized carrier and the reactive gas [Chemical Reactor Engineering Centre (CREC) fluidized riser simulator]. Multiple reduction oxidation cycles were performed. TEM images of the carriers showed that a perfect mesoporous silica layer was formed around samples with 4, 32, and 55 nm in thickness. The oxygen carriers having a core shell structure showed higher reactivity and stability during 10 repeated redox cycles compared to the LaMn0.7Fe0.3O3.15 core. This could be due to a protective role of the silica shell against sintering of the particles during repeated cycles under CLC conditions. The agglomeration of the particles, which occurred at high temperatures during CLC cycles, is more controllable in the core shell-structured carriers, as confirmed by SEM images. XRD patterns confirmed that the crystal structure of all perovskites remained unchanged after multiple redox cycles. Methane conversion and partial conversion to CO, were observed to increase with the contact time between methane and the carrier. Indeed, more oxygen from the carrier surface, grain boundaries, and even from the bulk lattice was released to react with methane. Upon rising the contact time, less CO was formed, which is desirable for CLC application. Increasing the reaction temperature and methane partial pressure lead to enhanced conversions of CH4 under CLC conditions.

Enhanced performance of LaFeO3 oxygen carriers by NiO for chemical looping partial oxidation of methane

Tailoring Catalytic and Oxygen Release Capability in LaFe1–xNixO3 to Intensify Chemical Looping Reactions at Medium Temperatures

Oxygen activity regulation over LaNiO 3 perovskites by Ti substitution for chemical looping partial oxidation of methane

Nanoscale structural transformations in LaFeO 3 oxygen carriers for enhanced reactivity in chemical looping combustion

NiO/κ-CeZrO4 functional oxygen carriers with Niδ+ and oxygen vacancy synergy for chemical looping partial oxidation reforming of methane

Enhanced performance of the CeO2MgO oxygen carrier by NiO for chemical looping CO2 splitting

Enhanced performance of chemical looping methane oxidative coupling by the synergistic effect of TiO2 doped Na2WO4/Mn2O3/SiO2 oxygen carriers

Achieving surface and bulk rate matching for chemical looping partial oxidation of methane by modulating oxygen transport

Self-generated Ni Nanoparticles/lafeo3 Heterogeneous Oxygen Carrier for Robust CO2 Utilization under a Cyclic Redox Scheme

LaFe1-xNix As a Robust Catalytic Oxygen Carrier for Chemical Looping Conversion of Toluene

Enhanced Resistance to Carbon Deposition over LaxCe1–xFexNi1–xO3 Oxygen Carrier for Chemical Looping Reforming

High-reactive and Coke-Resistant Polyhedral NiO/Fe2O3 Oxygen Carrier for Enhancing Chemical Looping CH4–CO2 Dry Reforming

Performance of LaNixFe1-xO3 as Oxygen Carriers in Chemical-Looping Combustion Reaction

A High-Performance Oxygen Carrier with High Oxygen Transport Capacity and Redox Stability for Chemical Looping Combustion

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas

Near 100% CO selectivity in nanoscaled iron-based oxygen carriers for chemical looping methane partial oxidation

Performance of Ni-Based, Fe-Based and Co-Based Oxygen Carriers in Chemical-Looping Hydrogen Generation

Enhanced performance of chemical looping combustion of methane by combining oxygen carriers via optimizing the stacking sequences

Development of Sinter-Resistant Core–Shell LaMnxFe1–xO3@mSiO2 Oxygen Carriers for Chemical Looping Combustion

Enhanced oxygen activity of LaFeO 3 oxygen carriers in biomass chemical looping gasification coupled with CO 2 /H 2 O splitting by fragmented flaky structure

Lattice oxygen behaviors of Mn-based catalytic oxygen carriers and sustainable oxidative coupling of methane in chemical-looping scheme