Abstract:The application of C/C-SiC composites remains a challenge because of the poor mechanical properties induced by the liquid silicon infiltration method. In this study, a thick high textured pyrolytic carbon (HT PyC) interface manufactured by chemical vapor infiltration (CVI) was used to protect the carbon fibers and improve the flexural properties. The microstructure of HT PyC, its flexural properties, and its associated strengthening and toughening mechanisms were analyzed on the C/C-SiC composites. The results showed that the bending strength of the C/CSiC composites was 344.74 MPa, which is nearly 31.82% higher than that of C/C composites. The fracture mode transformed from brittle fracture to pseudoplastic fracture owing to the addition of SiC, and the C/C-SiC composites maintained a better toughness compared to C/C composites. Multiple mechanisms of strength and toughness improvement were found to be responsible for the excellent performance of the C/C-SiC composites. The HT PyC interface played a critical role in the excellent flexural properties. The strong bonding among the carbon layers and high interfacial strength between the fiber and HT PyC led to the increase of strength. Besides, the improvement in toughness was attributed to the multiple effects of the carbon-layers deformation, cracks deflection and propagation caused by the bridging areas, sublayers, nano-and micro-scale cracks.

Improvement of the mechanical properties of two-dimensional carbon/carbon composites

Improvement in toughness of carbon/carbon composites using multiple matrixes

Investigation of Mechanical Properties of 2D C /C Composites Filled with Different Fillers

INFLUENCE OF MATRIX MODIFICATION ON MICROSTRUCTURE AND PROPERTIES OF CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

Mechanical properties improvement of carbon/carbon composites by two different matrixes

Optimizing Matrix and Fiber/matrix Interface to Achieve Combination of Strength, Ductility and Toughness in Carbon Nanotube-Reinforced Carbon/carbon Composites

Fracture Mechanism of 2D-C/C Composites with Pure Smooth Laminar Pyrocarbon Matrix under Flexural Loading

Microstructure and Mechanical Properties of Carbon Fiber Reinforced Multilayered (pyc–sic)n Matrix Composites

Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites

Experimental And Numerical Investigations Of The Interlaminar Shear Properties Of Carbon/Carbon Composites

Mechanical Property And Toughening Mechanism Of 2.5d C/C-Sic Composites With High Textured Pyrocarbon Interface

Microstructure and Flexural Properties of Carbon/carbon Composite with In-Situ Grown Carbon Nanotube As Secondary Reinforcement

Improvement of Interlaminar Fracture Toughness in Carbon Fiber/epoxy Composites with Carbon Nanotubes/polysulfone Interleaves

Microstructure and mechanical properties of 3D needled carbon fibre reinforced carbon and silicon carbide composites

Microstructure and Mechanical Properties of Multilayer-textured 2D Carbon/Carbon Composites

Tailoring the toughening effects in two-dimensional nanomaterial-reinforced ceramic matrix composites

Mechanical Properties of Carbon/carbon Composites with the Fibre/matrix Interface Modified by Carbon Nanofibers

Improvement of the Mechanical and Thermophysical Properties of C/SiC Composites Fabricated by Liquid Silicon Infiltration

Mechanical properties of C/C-SiC composites by compression molding

Mechanical properties and fracture behavior of CVI-SiC/TaC modified C/C composite

Effect of Carbon Particle and Carbon Fiber on the Microstructure and Mechanical Properties of Short Fiber Reinforced Reaction Bonded Silicon Carbide Composite