Abstract:The keeper and cast dowel-coping, as a primary component for a magnetic attachment, is easily subjected to corrosion in a wet environment, such as the oral cavity, which contains electrolyte-rich saliva, complex microflora and chewing behaviour and so on. The objective of this in vitro study was to examine the corrosion resistance of a dowel and coping-keeper complex fabricated by finish keeper and three alloys (cobalt-chromium, CoCr; silver-palladium-gold, PdAu; gold-platinum, AuPt) using a laser-welding process and a casting technique. The surface morphology characteristics and microstructures of the samples were examined by means of metallographic microscope and scanning electron microscope (SEM). Energy-dispersive spectroscopy (EDS) with SEM provided elements analysis information for the test samples after 10% oxalic acid solution etching test. Tafel polarization curve recordings demonstrated parameter values indicating corrosion of the samples when subjected to electrochemical testing. This study has suggested that massive oxides are attached to the surface of the CoCr-keeper complex but not to the AuPt-keeper complex. Only the keeper area of cast CoCr-keeper complex displayed obvious intergranular corrosion and changes in the Fe and Co elements. Both cast and laser-welded AuPt-keeper complexes had the highest free corrosion potential, followed by the PdAu-keeper complex. We concluded that although the corrosion resistance of the CoCr-keeper complex was worst, the keeper surface passive film was actually preserved to its maximum extent. The laser-welded CoCr- and PdAu-keeper complexes possessed superior corrosion resistance as compared with their cast specimens, but no significant difference was found between the cast and laser-welded AuPt-keeper complexes. The Fe-poor and Cr-rich band, appearing on the edge of the keeper when casting, has been proven to be a corrosion-prone area.

The developments in corrosion and protection of dental alloys

[Microbial Corrosion of Dental Alloy].

Change of corrosion Oil nickel-titanium arch wires in oral environment

Research development of corrosion of titanium in the oral bioenvironment

An electrochemical study on corrosion behavior of three alloys in artificial saliva with different pH

The Effect on the Corrosion Resistance of Ti Alloy in the Artificial Saliva with Different pH Value

The correlation study between composition and corrosion resistance of dental non-noble metal under acidic environment

A study of corrosion resistance of five dental alloys used for crowns

Corrosion behaviours of the dental magnetic keeper complexes made by different alloys and methods

Comparative Study on the Corrosion Behavior of Ti–Nb and TMA Alloys for Dental Application in Various Artificial Solutions

Influence of finishing on the electrochemical properties of dental alloys.

Effects of Alloying Elements and Microstructure on Stainless Steel Corrosion: A Review

Recent research advances on corrosion mechanism and protection, and novel coating materials of magnesium alloys: a review

Biological corrosion behaviour and antibacterial properties of Ti-Cu alloy with different Ti2Cu morphologies for dental applications

Corrosion Behaviors of Selective Laser Melted Aluminum Alloys: A Review

Research Progress on Corrosion Behaviors and Improvement Methods of Medical Degradable Mg−Based Alloys

The corrosion resistance, cytotoxicity, and antibacterial properties of lysozyme coatings on orthodontic composite arch wires

Analysis and Comparison of the Corrosive Behavior of Nickel-Based and Cobalt-Based Dental Alloys

Alloys for prosthodontic restorations

Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys

Effect of fluoride on the corrosion behavior of Ti and Ti6Al4V dental implants coupled with different superstructures.