Fabrication of plasma-sprayed TiC-Ti5Si3-Ti3SiC2 composite coatings from the annealed Ti/SiC powders
Chao Li,Zhanpeng Zhou,Lanming Hu,Jining He,Gaofeng Zheng,Hongjian Zhao,Yanchun Dong,Yong Yang,Yanfang Qin,Fuxing Yin
DOI: https://doi.org/10.1016/j.surfcoat.2021.127227
IF: 4.865
2021-07-01
Surface and Coatings Technology
Abstract:TiC-Ti5Si3-Ti3SiC2 composite coatings were plasma sprayed in-situ using the annealed Ti/SiC powders and raw graphite powder. The microstructure and properties of the sprayed coatings depending on the annealing temperatures of the Ti-SiC powders were investigated. For the annealed Ti-SiC powders, the interface structure of Ti/TiC/Ti5Si3/Ti3SiC2/SiC was formed between Ti and SiC. The sprayed coating from raw powders consisted of TiC, MAX phase Ti3SiC2, Ti5Si3, and residual Si. The sprayed coatings from the annealed Ti-SiC powders consisted of TiC, MAX phase Ti3SiC2, Ti5Si3, and residual SiC. With the increase of the annealing temperature of Ti-SiC powders, TiC and MAX phase Ti3SiC2 increased, and Ti5Si3 phase decreased. For the sprayed coatings from the annealed Ti-SiC powders at 1200 °C, their hardness and fracture toughness were enhanced maximally by 33% and 53%, respectively. Their wear resistance was also improved by decreasing the mass loss maximally by 80%.
physics, applied,materials science, coatings & films