Abstract:Thick superconducting multilayer architectures consisting of alternate superconducting and superconducting layers DyBCO/YBCO and alternate superconducting and insulating layers YBCO/CuO(Y2O3) are developed on buffered Hastelloy tapes using a metal organic deposition process. It is revealed that multilayer intermittent structures for superconducting layers are effective to avoid the presence of microcracks that occur with increasing thickness, which are frequently observed in monolayer films ofREBa(2)Cu(3)O(7-delta) (REBCO, RE= Y, Gd, or other rare earth elements). This paper shows that the thicknesses of DyBCO/YBCO multilayer films can reach 2.8 mu m with a homogeneous, dense and crack-free surface morphology. The out-plane FWHM of the YBCO (005) peaks and the critical current value reach 1.1 degrees and 365 A/cm (77 K, self-field) for such a thick film consisting of Dy-BCO/YBCO multilayers. It is also revealed that the introduction of a CuO layer is effective to avoid the presence of a-axis grains and voids of the YBCO films, which are frequently observed in multilayer films. Note that the introduction of CuO shows little negative influence on the texture of multilayer structure, especially for the bottom CuO. However, the in-plane texture deteriorates seriously for Y2O3/YBCO/YBCO multilayer film. The critical current density of YBCO films with middle CuO and bottom CuO are 2.0 MA/cm(2) and 2.5 MA/cm(2) (77 K, self-field), respectively. The microstructure optimization including the texture, uniformity, crack, defect, and porosity in the multilayered films is probably the reason for the enhancement of superconducting performance.

Liquid phase epitaxy processed coated conductors on metal tapes

Development of Double Layered Lpe Processing for High-T-C Re123 Coated Conductors Using Mgo Saturated System

Growth of RE123 Crystal from the NiO Saturated Solution by LPE Method

YBa2Cu3O7-δ/NdBa2(Cu1-xNix)3O7-δ Double Layers by Liquid-Phase Epitaxial Growth

LPE Growth of RE123 on a Metal Substrate

Yba2cu3o7-Delta/Ndba2(Cu1-Xnix)(3)O7-Delta Double Layers by Liquid-Phase Epitaxial Growth

Development of LPE Process for Fabrication of Coated Conductors

Long-length Y-Ba-Cu-O coated conductors produced by surface-oxidation epitaxy method

Epitaxial growth of YSZ buffer layer for YBa2Cu3O7-δ coated conductor by reel to reel pulsed laser deposition

Fast Growth Processes of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes

Reel-To-Reel Deposition of Epitaxial Double-Sided Y2o3 Buffer Layers for Coated Conductors

Uniformity of Long-Length Double-Sided CeO_2 Buffer Layer for YBa_2Cu_3O_(7-δ) Coated Conductors

Rapid Deposition of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes

Improved Textured La2Zr2O7 Buffer Layers on Bi-Axially Textured Ni–W Substrates Using CeO2 Seed Layers for YBa2Cu3O7−x Coated Conductors

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate

Epitaxial growth of Gd 2 Zr 2 O 7 /Y 2 O 3 buffer layers for YBa 2 Cu 3 O 7− δ coated conductors

Simultaneous double-sided deposition of long-length epitaxial CeO 2 buffer layers for YBCO coated conductors

Growth of Thick La2Zr2O7 Buffer Layers for Coated Conductors by Polymer-Assisted Chemical Solution Deposition

Growth of Simplified Buffer Template on Flexible Metallic Substrates for YBa2Cu3O Coated Conductors

Reel-To-Reel Continuous Deposition Of Ce(X)Zr(1-X)O(2) Single Buffer Layer For Ybco Coated Conductors

Artificial Multilayers of REBaCuO/YBaCuO and YBCO/CuO(Y2O3) for High-Performance Long Tapes of Coated Conductors Derived by Metal Organic Solution Deposition