Abstract:A series of thermosetting siloxane-containing polyimide resins were synthesized by incorporating of bis(p-aminophenoxy)dimethylsilane or bis(p-aminophenoxy)tetramethyldisiloxane with various concentrations into formulated oligoimides. These thermosetting polyimide resins exhibited good combination of processability and thermal resistance. It was found that siloxane-containing oligoimides provided significant advantages over unmodified oligoimides, relative to melt fluidity and processing window, due to the flexibility of D[(CH3)2SiO2/2] siloxy units. The siloxane-containing polyimide resins cured at 380 °C revealed relatively higher glass transition temperatures (Tg) than that of unmodified polyimides, despite the incorporation of flexible siloxane segment in oligoimides. Dynamic mechanical analysis and microstructure investigation suggested that some D[(CH3)2SiO2/2] siloxy units in the surface layer of polyimide transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units in the curing procedure besides crosslinking of phenylethynyl groups, due to oxidation crosslinking of siloxane. That led to inorganic silica-like structures formed in situ, and inter-connected by organic polyimide segments. This organic/inorganic hybrid characteristics endowed polyimide resins with enhanced thermal property. After post-curing at 450 °C, D[(CH3)2SiO2/2] siloxy units completely transformed into T[CH3SiO3/2] and Q[SiO4/2] siloxy units, and the polyimide reins gave the Tg even exceeding 550 °C. Meanwhile, the corresponding T700 carbon fiber reinforced composite presented excellent mechanical property and durability at the temperature as high as 500 °C.

Novel Polyimide/Silica Nanohybrids from Water Glass

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Properties of Polyimide/Silica Nanohybrids from Silicic Acid Oligomer

Polyimide/silica/titania Nanohybrids Via a Novel Non-Hydrolytic Sol–gel Route

Synthesis and Characterization of Nanocomposite of Polyimide-Silica Hybrid from Nonaqueous Sol-Gel Process

Synthesis And Characterization Of Polyimide/Silica Hybrid Waveguide Materials Via Sol-Gel Technique

Microstructure and Properties of Organosoluble Polyimide/silica Hybrid Films

Comparison of Hybrid Polyimide Films with Silica and Organosilica Obtained Via Sol–gel Process

Preparation, Morphological and Thermal Stability of Polyimide/Silica Hybrid Material Containing Dye Nbdpa

In Situ Polymerization and Characterization of Polyamide-6/Silica Nanocomposites Derived from Water Glass

Polyimide/fluorinated silica composite films with low dielectric constant and low water absorption

Study of Nonlinear Optical Fluorine-Containing Polyimide/silica Hybrid Waveguide Nanomaterial

Thermosensitive hybrid hydrogels with silica nanoparticle-cross-linked polymer networks

Preparation and Characterization of Polyimide/Fluorinated Silicate Nano-Hybrid Thin Films with Low Refractive Indices

Fabrication and Properties of Thermosensitive Organic/inorganic Hybrid Hydrogel Thin Films.

PMMA–silica hybrid thin films with enhanced thermal properties prepared via a non-hydrolytic sol–gel process

Synthesis, structural and morphological characteristics of (P(MA-MPTMS)/SiO2 hybrid nanocomposites

Melt fluidity and thermal property of thermosetting siloxane-containing polyimide resins and their organic/inorganic hybrid characteristics

Enhanced Thermal Properties and Flame Retardancy of a Novel Transparent Poly(methyl Methacrylate)-Based Hybrid Prepared by the Sol–Gel Method