Abstract:Stable and efficient syngas production via methane dry reforming is highly desirable as it utilizes two greenhouse gases simultaneously. In this work, active Ni–Cu nanoalloys stably anchored on periclase-phase MgAlOx nanosheets were successfully synthesized by a hydrothermal method. These highly dispersed small Ni–Cu alloys strongly interacted with the periclase-phase MgAlOx nanosheets, on which abundant base sites were accessible. On the optimal catalyst (6Ni6CuMgAl–S), methane and carbon dioxide conversion always reached 85 and 90% at 700 °C under a gas hour speed velocity of 40,000 mL/gcat h for more than 70 h. The hydrogen production rate was maintained at 1.8 mmol/min, and the ratio of H2/CO was kept at approximately 0.96 under a CH4 and CO2 flow rate of 25 mL/min. Coke deposition and Ni sintering were effectively suppressed by the formation of a Ni–Cu alloy, the laminar structure, and the periclase phase of the MgAlOx support. Moreover, the alloy nanoparticles were reconstructed into a segregated Ni–Cu alloy structure in response to the reaction environment, and this structure was more stable and still active. Density functional theory calculations showed that carbon adsorption was inhibited on the segregated Ni–Cu alloy. Furthermore, the experimental thermogravimetric and O2-TPO results confirmed the significant decrease in carbon deposition on the Ni–Cu alloy catalysts.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14918.DFT theoretical calculation; additional characterizations of some catalysts, including XRD patterns, SEM images, N2 adsorption, desorption, and pore size distribution; H2-TPR profiles; H2-TPD profiles; HAADF image and element mapping; TEM images; XPS spectra; acid property; and additional reaction data (PDF)This article has not yet been cited by other publications.

Hexaaluminate Catalysts of the novel process of syngas production through catalytic oxidation and Steam-CO2 reforming of methane

In Situ Fabrication of Highly Active Γ-Mno2/smmno3 Catalyst for Deep Catalytic Oxidation of Gaseous Benzene, Ethylbenzene, Toluene, and O-Xylene.

Catalytic oxidation of methane over hexaaluminates and hexaaluminate-supported Pd catalysts

Synthesis of Hexaaluminogallate Catalysts for Nox Reduction

A novel catalyst with plate-type anodic alumina supports, Ni/NiAl2O4/γ-Al2O3/alloy, for steam reforming of methane

Methane Dry Reforming by Ni-Cu Nanoalloys Anchored on Periclase-Phase MgAlO<i><sub>x</sub></i> Nanosheets for Enhanced Syngas Production

Methane Dry Reforming by Ni–Cu Nanoalloys Anchored on Periclase-Phase MgAlO x Nanosheets for Enhanced Syngas Production

Manganese‐modified metal nanoparticle catalysts for syngas to C2+‐ oxygenates

Reforming of Methane with Oxygen and Carbon Dioxide to Produce Syngas over A Novel Pt/Coal2o4/Al2o3 Catalyst

Metal-Organic Framework-Templated Synthesis of Nickel-Alumina Nanocatalysts Improves Catalyst-Support Interaction for Higher Activity and Stability in Biogas Reforming under Controlled Oxidizing Conditions

A Novel CO Methanation Catalyst System Based on Acid-Etched Natural Halloysites As Supports

Enhancement of the redox reactions of the La0.8Sr0.2MnO3 catalyst by surface acid etching: A simple synthesis strategy to high-performance catalysts for methane combustion

Study Of Durable Catalyst For Methane Reforming Using Co2

Engineering an effective MnO2 catalyst from LaMnO3 for catalytic methane combustion

Alkaline Earth Metal Aluminate Support for Selective Oxidative Coupling of Methane

CO2 Methanation: Nickel–Alumina Catalyst Prepared by Solid-State Combustion

Highly Active and Stable Lanthanum‐doped Core–Shell‐structured Ni@SiO2 Catalysts for the Partial Oxidation of Methane to Syngas

Preparation of Novel Mesoporous LaFeO3-SBA-15-CTA Support for Syngas Formation of Dry Reforming

High-performance Nano-Structured Ni Based Catalysts for High-Temperature CO2CH4 Reforming—greenhouse Gases to Syngas

A Plate-Type Anodic Alumina Supported Nickel Catalyst for Methane Steam Reforming

Synthesis and characterization of Mn3O4 and Mn2O3 nanocrystals on SBA-15: Novel combustion catalysts at low reaction temperatures