Abstract:Natural gas with methane as the main constituent is a natural resource that exceeds the reserves of oil in abundance. With inevitable depletion of crude oil, methane will become the major resource for chemicals and liquid fuels in future decades. Extensive efforts have been afforded to both direct and indirect conversion of methane. The direct-conversion approaches involve, for example, the selective oxidation of methane to methanol or formaldehyde, the oxidative coupling of methane (OCM) to C2 species (C2H6 and C2H4) and so on. Since the pioneering work of Keller and Bhasin, much research has been carried out into developing highly efficient catalysts for OCM. Unfortunately, the per pass C2 yields on nearly all reported catalysts are less than 30 %. OCM is believed to occur through a heterogeneous–homogeneous pathway. The mechanism proposes first the catalytic formation of methyl groups on catalyst surface, which desorb as free radicals (CH3·) into the gas phase and ultimately react by predominantly homogeneous pathways. 8] It is generally agreed that some oxygen species O* adsorbed on the catalyst surface are the active oxygen species for the activation of methane to form methyl radicals and play a key role in the selective generation of C2, whereas gaseous oxygen molecules mainly favor the formation of COx. [9–12] By assuming a reaction mechanism via methyl radicals formed by the reaction of methane with surface oxygen species, an upper limit of 28 % for the C2 yield is forecasted for a continuous, CH4/O2 co-fed, single pass process under conventional conditions, such as those used for laboratory screening. The inherent reason for such a limited C2 yield is that the gaseous oxygen—as required oxidant for OCM—can react with the more reactive C2 product to form COx and, thus, a higher C2 selectivity is always compromised with a lower CH4 conversion. [14] To attain a high C2 yield, it is necessary to reduce the nonselective gaseous oxygen concentration. Perovskite oxides with mixed conductivities have been attracting increasing attention due to their potential applications in air separation, as catalysts for selective oxidation, and as reactors for the partial oxidation of hydrocarbons or for other oxygen-involving reactions. Moreover, in the past decade, halide-modified oxides have been widely studied for oxidative dehydrogenation of ethane (ODE) to ethylene and were proven to offer a significant improvement in the performance of the selective oxidation. In this study, a novel chlorinedoped Ba0.5Sr0.5Fe0.2Co0.8O3 d (denoted as BSCFCls) was used as catalyst for the OCM in a fixed-bed reactor. Furthermore, N2O was chosen as the oxygen source because it is a relatively weak oxidant, which is suitable for selective oxidation. Herein, we want to show that (a) the introduction of Cl into Ba0.5Sr0.5Fe0.2Co0.8O3 d enhances the selectivity for the methyl radical formation and (b) N2O as oxidant can effectively reduce gaseous oxygen concentration, since it provides oxygen in the form of surface oxygen species rather than gas-phase oxygen molecules by decomposition on the catalyst surface. Figure 1 shows the concept of OCM on perovskite oxide catalysts using N2O as oxidant.

Alkaline Earth Metal Aluminate Support for Selective Oxidative Coupling of Methane

Oxidative coupling of methane—comparisons of MnTiO3–Na2WO4 and MnOx–TiO2–Na2WO4 catalysts on different silica supports

Elucidating the Role of Oxygen Species in Oxidative Coupling of Methane over Supported MnOx‐Na2WO4‐containing Catalysts

Oxidative Coupling of Methane over Alkali Metal Oxide Promoted La2O3/BaCO3 Catalysts

Critical Surface Parameters for the Oxidative Coupling of Methane over the Mn-Na-W/SiO2 Catalyst

High-Pressure oxidative coupling of methane on alkali metal catalyst – Microkinetic analysis and operando thermal visualization

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

Characterization and Catalytic Behavior of Na-W-Mn-Zr-S-P/Sio2 Prepared by Different Methods in Oxidative Coupling of Methane

Intelligent Optimization of Na−Mn−W/SiO2 Catalysts for the Oxidative Coupling of Methane

Probing Low-Temperature OCM Performance over a Dual-Domain Catalyst Bed

Site Requirements for the Oxidative Coupling of Methane on SiO<sub>2</sub>-Supported Mn Catalysts

High‐performance Mn2O3‐Na2WO4/SiO2‐TiO2 catalyst for the oxidative coupling of methane: TiO2‐modulated MnTiO3 formation for enhanced low‐temperature performance

Active oxygen center in oxidative coupling of methane on La2O3 catalyst

Single-Site Catalysis of Li-MgO Catalysts for Oxidative Coupling of Methane Reaction

Surface coupling of methyl radicals for efficient low-temperature oxidative coupling of methane

Tungstate promoted CaMnO3-based core-shell redox catalysts for efficient chemical looping oxidative coupling of methane

Assessment of catalysts for oxidative coupling of methane and ethylene

Study on the Synergistic Effect of SiO 2 and H 2 O on Oxidative Coupling of Methane over Mn-Na 2 WO 4 /SiO 2 Catalyst

Alkaline-Etched NiMgAl Trimetallic Oxide-Supported KMoS-Based Catalysts for Boosting Higher Alcohol Selectivity in CO Hydrogenation

Synthesis of Nanoparticle Ce–Mg–O Mixed Oxide As Efficient Support for Methane Oxidation

Oxidative Coupling of Methane with High C2 Yield by Using Chlorinated Perovskite Ba0.5Sr0.5Fe0.2Co0.8O3−δ As Catalyst and N2O As Oxidant