Abstract:High-carbon and high-chromium alloy steels are prone to pitting and intergranular corrosion, which reduces corrosion resistance. The precipitation behavior of the carbides of high-carbon and high-chromium alloy steels is one of the main factors affecting pitting and intergranular corrosion of stainless steel. In this study, 5Cr15MoV stainless steel was heated to 1,200celcius and then cooled by cooling rates varying from 25 to 150 degrees C/min. The precipitation behavior of grain boundary carbides of 5Cr15MoV steel at different cooling rates, and its effect on the corrosion resistance of materials was studied. The results show that the carbides of 5Cr15MoV steel mainly precipitate along the grain boundaries, which leads to the formation of chromium-depleted zones near the grain boundaries and reduces resistance to intergranular corrosion. It has been found that a higher cooling rate shortens the width of the Cr-depleted zone near the boundary from 0.871 to 0.569 mu m, reduces the Cr-concentration gradient near the grain boundary from 36.422% to 12.667%, and suppresses the nucleus growth rate of grain boundary carbides. As the cooling rate increases, the corrosion current density decreases from 13.29 to 2.42 mu A/cm(2). The corrosion rate is the lowest, while the cooling rate is 150 degrees C/min. The corrosion rate decreases from 218.339 to 158.488 mm/a. The phenomenon of intergranular corrosion and pitting corrosion was found to be weakened; and thereby, it is shown that an intensive cooling rate can improve the corrosion resistance of 5Cr15MoV steel.

Effect of Cooling Rate on the Properties of the Grain Boundary of CaCu3Ti4O12 Ceramic

Polaron relaxation and non-ohmic behavior in CaCu3Ti4O12 ceramics with different cooling methods

Grain-boundary and subgrain-boundary effects on the dielectric properties of CaCu<sub>3</sub>Ti<sub>4</sub>O<sub>12</sub> ceramics

Influence of sintering temperature on giant dielectric property of CaCu3Ti4O12

Cu Segregation and Its Effects on the Electrical Properties of Calcium Copper Titanate

Study on the resistance transition behavior of CaCu3Ti4O12 by electrical conditioning

Effect of Cr Addition on the Structure and Electrical Properties of CaCu3Ti4O12 NTC Thermistor

Effect of Semiconductive Grain and Microstructure on the Dielectric Properties of Cacu3ti4o12 Ceramics with Sr2+ Doping

Effect of Synthesis Process on CuO Segregation and Dielectric Properties of CaCu 3 Ti 4 O 12 Ceramic

Effects of Cooling Rate on the Precipitation Behavior of Grain Boundary Carbide and Corrosion Resistance of 5cr15mov Stainless Steel

Grain Size Effect on the Dielectric and Non-Ohmic Properties of CaCu3Ti4O12 Ceramics Prepared by the Sol-Gel Process

The dimensional effect of dielectric performance in CaCu 3 Ti 4 O 12 ceramics: Role of grain boundary

Effect of grain boundary segregation on dielectric properties of CaCu3Ti4O12 ceramics

Role of Relaxation on the Giant Permittivity and Electrical Properties of CaCu3Ti4O12 Ceramics

Microstructure and Dc Conduction Properties of Cacu3 Ti4o12

Electrical properties and microstructural characteristics of nonstoichiometric CaCu3xTi4O12 ceramics

The Novel Effects of Cu-deficient on the Dielectric Properties and Voltage–current Nonlinearity in CaCu3Ti4O12 Ceramics

The Lowered Dielectric Loss Tangent and Grain Boundary Effects in Fluorine-Doped Calcium Copper Titanate Ceramics

Effect Of Stoichiometric Deviation On The Microstructure And Electrical Properties Of Copper Calcium Titanate Ceramics

Improved Dielectric and Nonlinear Properties of CaCu3Ti4O12 Ceramics with Cu-rich Phase at Grain Boundary Layers

Abnormal Dielectric Behaviors in Mn-Doped Cacu3ti4o12 Ceramics and Their Response Mechanism