Abstract:Once light is coupled to a photonic chip, its efficient distribution in terms of power splitting throughout silicon photonic circuits is very crucial. We present two types of 1 × 4 power splitters with different splitting ratios of 1:1:1:1 and 2:1:1:2. Various taper configurations were compared and analyzed to find the suitable configuration for the power splitter, and among them, parabolic tapers were chosen. The design parameters of the power splitter were determined by means of solving inverse design problems via incorporating particle swarm optimization that allows for overcoming the limitation of the intuition-based brute-force approach. The front and rear portions of the power splitters were optimized sequentially to alleviate local minima issues. The proposed power splitters have a compact footprint of 12.32 × 5 μm 2 and can be fabricated through a CMOS-compatible fabrication process. Two-stage power splitter trees were measured to enhance reliability in an experiment. As a result, the power splitter with a splitting ratio of 1:1:1:1 exhibited an experimentally measured insertion loss below 0.61 dB and an imbalance below 1.01 dB within the bandwidth of 1,518–1,565 nm. Also, the power splitter with a splitting ratio of 2:1:1:2 showed an insertion loss below 0.52 dB and a targeted imbalance below 1.15 dB within the bandwidth of 1,526–1,570 nm. Such inverse-designed power splitters can be an essential part of many large-scale photonic circuits including optical phased arrays, programmable photonics, and photonic computing chips.

Rigorous Comparison of Parabolically Tapered and Conventional Multimode-Interference-Based 3-Db Power Splitters in Ingaasp/Inp Waveguides

Fabrication of A Multimode-Interference-Based Multimode Power Splitter in Glass

Design of MMI Double-wavelength Optical Power Splitters

MULTI-MODE INTERFERENCE POWER SPLITTER IN GaAs FOR OPTICAL COMMUNICATION

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Optimization of MMI Optical Power Splitter Using Discrete Spectral Index Method

Design of a Compact Multimode Interference Power Splitter Based on Deeply-etched SiO2 Ridge Waveguide

Compact and economical MMI optical power splitter for optical communication

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Study and fabrication of multimode interference GaAs optical power splitter

Study and Fabrication of 1×16 MMI GaAs Optical Power Splitter

Multimode Interference Optical Power Splitter in Proton-Exchange LiNbO3 Waveguides

Design And Fabrication Of A 1-By-4 Multimode Interference Splitter Based On Inp

Optical Multi-Mode Interference Power Splitter in GaAs Fabricated by Preferential Etching

An ultra-broadband, and low loss 3-dB optical power splitter with curved adiabatic taper

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Three-dimensional Power Splitter Based on Self-Imaging Effect in Multimode Layer-by-layer Photonic Crystal Waveguides

Design and study of 0.85-µm wavelength-based MMI optical power splitter

Integrated Dual-Mode 3-Db Power Splitter Based on Multimode Interference Coupler

Inverse-designed taper configuration for the enhancement of integrated 1 × 4 silicon photonic power splitters