Abstract:To improve the mechanical properties of the surface of iron-based alloys, a ZrC–Fe coating is produced on cast ion via in situ solid-phase diffusion (ISSD) at 1130 °C. The coating is completely dense, reaching a thickness of approximately 18 μm after 10 h of ISSD. The volume fraction of the ZrC phase in the coating reaches approximately 92.3%. The size of the long axis (short axis) of columnar ZrC particles gradually decreases from approximately 4 μm (1.5 μm) to 1 μm (0.3 μm) as the thickness of the coating increases, displaying a gradient microstructure. The formation mechanism of the coating is mainly attributed to the carbon atoms diffuse into the octahedral vacancies of the zirconium lattice to undergo a diffusion-type solid state phase transformation to form ZrC, and α-Fe phase are distributed among the ZrC particles through the Fe atoms diffusion. Due to the carbon concentration gradient, the nucleation rate is reduced, thereby forming a gradient microstructure on the grain scale. The growth of the coating obeys the growth kinetic model d2=30.5t. In addition, the nanohardness and elastic modulus of the surface of the ZrC–Fe coating reach 29.7 GPa and 425.1 GPa, respectively, showing remarkable improvement compared to those of the cast iron substrate (4.5 GPa and 229.5 GPa, respectively). The fracture toughness gradually increases from 2.9 ± 0.1 MPa m1/2 to 3.6 ± 0.1 MPa m1/2 as the thickness of the coating increases. Moreover, the coating exhibits the superior coating/substrate adhesion. The excellent comprehensive mechanical properties are tightly related to a small amount of high toughness α-Fe phase, high volume fraction of in situ ZrC particles and the gradient change of the ZrC grain scale.

Investigation on Mircro-Structure of Zircon Coating

Influence of Zirconia Sol-Gel Coating on Fracture Strength of Chemical Strengthened Soda Lime Glass

Preparation of Al2O3-ZrO2 Composite Ceramic Coating by a New Sol-gel Method and It's Structure

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Study of Zirconium Coating on Si;N; Ceramic Surface by Molten Salt Reaction

Formation of Intragranular Nanocavities in the Cr 2 O 3 Layer During the Corrosion of Cr 3 C 2+cr Coated Zirlo TM

Investigation into the Change of Structure, Mechanical Properties and Thermal Stability for ZrN Coating by Oxygen Addition

Microstructure, Formation Mechanism and Mechanical Properties of ZrC–Fe Coating on Cast Iron Via in Situ Solid-Phase Diffusion

High-temperature Oxidation of Sprayed Alumina and Zirconium‑yttrium-Based Coatings on Zircaloy-4 in Air and Oxygen: Investigation on Microstructure Evolution and Phase Changes

The enhanced structure stability and the reinforcement mechanism of 0.1Al2O3-ZrO2 reinforced MoSi2 composite coating

Formation of Al2O3–ZrO2 Composite Coating on Zirconium by Micro-Arc Oxidation

Microstructure and Mechanical Properties of ZrC Coating on Zirconium Fabricated by Interstitial Carburization

Microstructure Analysis of Zirconium Carbide Layer on Pyrocarbon-Coated Particles Prepared by Zirconium Chloride Vapor Method

Microstructure characterization and thermal conductivity analysis of plasma sprayed ZrO 2 coatings

Preparation and Microstructure of Nanostructured Al2O3-ZrO2 Coating

Relationship between microstructure and bonding strength of yttria-stabilized zirconia thermal barrier coatings

Microstructure and Wear Resistance of Ceramic Coating Prepared on Aluminum Alloy by Micro-Arc Oxidation in Zirconate Electrolyte

Preparation and Microstructures of CoAl(2)O(4) ZrO(2) Composite

Influence of Oxidation Time on Microstructure and Composition of Micro-Arc Oxidation Coatings Formed on Zirconium

The Effect of Zirconia Sol-Gel Coatings on Mild Steel Oxidation Resistance

Research on the Existence and Stability of Interfacial Tetragonal Zirconia Formed on Zirconium Alloys