Abstract:Abstract Nitrides, carbides, and carbonitrides of transition metal elements like Zr, W, Ti, etc. are generally employed to produce hard coatings. Zirconium-based hard coatings have shown useful applications in the areas of tribology, biomedicine and electrical due to their high thermal stability, hardness, biocompatibility, good erosion, wear, and corrosion resistance. In this study, we created homogeneous and tenacious nanostructured hard coatings based on Zr with good mechanical properties. The magnetron sputter deposition technique was utilized to coat stainless steel 316L substrates with multilayers of Zr/ZrN and ZrN/ZrCN with individual layer thicknesses of 250 and 500 nm for each coating composition. The deposition conditions were adjusted to create two different coating thicknesses of 2 and 3 μm. The thickness of the coating was confirmed using Calotest and the coatings’ morphology and elemental composition were determined utilizing the atomic force microscope and scanning electron microscope equipped with energy dispersive x-ray spectrometer. Coating thickness and adhesion were measured using cross-sectional samples and XRD was utilized to analyze the coatings structure. Nanoindenter was employed to determine the instrumental nanoindentation hardness and elastic modulus. The influence of coating thickness on tribological behavior was further investigated using the ratio of nanohardness-to-elastic modulus (H/E). No evidence of decohesion was observed at the substrate/coatings interface, and the grains of all the coatings were observed to show columnar growth which were homogeneous, compact and dense. The grains of the ZrN/ZrCN coatings were observed to be denser, finer and more compact compared to those of the Zr/ZrN coatings. Correspondingly, higher hardness, modulus and H/E values were exhibited by ZrN/ZrCN than Zr/ZrN coatings. This suggests that the ZrN/ZrCN coatings are capable of exhibiting better wear resistance and fracture toughness. The coatings developed in this investigation are anticipated to be suitable for applications in tribology due to their excellent hardness and H/E properties.

Investigation into the Change of Structure, Mechanical Properties and Thermal Stability for ZrN Coating by Oxygen Addition

Investigation on the Microstructure and High-Temperature Properties of AlN Coating Through Oxygen Addition

The high-temperature oxidation and mechanical properties of the Cr/Zr and CrN/Zr coating

Deposition, microstructure and nanoindentation of multilayer Zr nitride and carbonitride nanostructured coatings

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Effect of nano-multilayered ZrN/TiAlN hard coating as the interlayer on the microstructure, mechanical properties, and wear resistance

Microstructure and tribological properties of ZrB 2 -enhanced NiCrBSi coatings prepared by high-velocity oxy-fuel spraying

The Surface Modification of ZrO2 Film by Zr/Nb Ion Implantation and First-Principles Calculation

Tem Characterizations of a Zro2/Cr Composite Coating on Zr-1nb Alloy after 1200°C Steam Oxidation

Microstructure characterization and thermal conductivity analysis of plasma sprayed ZrO 2 coatings

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

Oxidation behavior, thermal stability, and the coating/substrate interface evolution of CrN-coated Zircaloy under high-temperature steam

Novel Structures and Mechanical Properties of Zr2N: Ab Initio Description under High Pressures*

Effect of Isothermal Oxidation on the Structural Properties of (Ni,Pt)Al Coatings Doped with Zr at 1150 °C

Systematic investigations on the oxidation mechanism of Cr coated Zr-4 alloy under different high-temperature steam conditions

Effect of alloying oxygen on the microstructure and mechanical properties of Zr-based bulk metallic glass

Investigation on Mircro-Structure of Zircon Coating

Effect of Nano-ZrO2 on the Microstructure and High Temperature Tribological Properties of MoSi2 Coating

Oxygen‐vacancy‐mediated microstructure and thermophysical properties in Zr 3 Ln 4 O 12 for high‐temperature applications

The Role of Oxygen Vacancies in Phase Transition and the Optical Absorption Properties within Nanocrystalline ZrO2

Microstructural evolution of Cr-coated Zr-4 alloy prepared by multi-arc ion plating during high temperature oxidation