Abstract:The work aims to study effects of sliding speed, normal load and heating temperature on friction and wear properties of Ni-P/Ti/DLC multilayer films. Ni-P layer was plated on die steel substrates by adopting electroless nickel-phosphate plating process, and Ti transition layer and DLC protective layer were deposited by adopting filtered cathodic vacuum arc tech·60· 表面技术 2018 年 7 月 nology individually. Friction and wear properties of the multilayer films were evaluated in friction and wear experiments. Hardness, elastic modulus and composition of the multilayer films at different heating temperature were characterized based upon nanoindentation test and Raman spectrum detection. Wear track morphology and cross-sectional profile of the multilayer films were also analyzed with scanning electron microscope (SEM) and surface profile instrument. As the sliding speed increased, friction coefficient of the multilayer films decreased, and wear rate and volume first reduced and then increased. Friction coefficient of multilayer films changed slightly at different normal loads, and wear rate and volume increased as normal load increased. As the heating temperature increased, the friction coefficient of multilayer films decreased, and wear rate and volume first increased and then decreased. In addition, at higher heating temperature, graphite phase gradually increased on DLC layer of the multilayer films, hardness and elastic modulus tended to first increase and then decrease. At higher slide speed, graphitization trend of the DLC layer intensifies, friction coefficient changes greatly, width and depth of wear tracks increase greatly, and wear is worse. Soft Ti metal layer and hard DLC layer in multilayer films can effectively improve friction and wear properties at high load. As heating temperature increases, graphite phase gradually increases in DLC layer, and transfer film is easier to be generated in friction process.

Friction Characteristics of DLC Films on the Silicon Nitride Ceramic Surfaces at High Temperature Conditions

Friction and Wear Properties of Ni-P/Ti/DLC Multilayer Films

Tribological Property Analyses of Dlc Films on Ceramic Ball Surfaces with 3-D Fea Method and Experiments

Preparation and Tribological Properties Research of DLC Film on the Surface of Si_3N_4 Ceramics

Wear-resistance of Diamond-like Carbon Thin Films Deposited on the Metal Seal Ring Surface by Plasma Gun at an Atmospheric Pressure

Tribological Properties of DLC Nanolayer on Si Prepared by Plasma-Based Ion Implantation

High temperature tribology behavior of silicon and nitrogen doped hydrogenated diamond-like carbon (DLC) coatings

Friction and Wear Behaviors of Different DLC Films Sliding Against SiC and Si3N4 Balls under High Relative Humidity

Tribological performance of DLC-coated ceramics against cemented carbide under dry sliding conditions

Mechanical and Tribological Properties of Diamond-Like Carbon Films Deposited by Electron Cyclotron Resonance Microwave Plasma Chemical Vapor Deposition

High-temperature Tribological Properties of Si3N4/TiC Ceramic with Bionic Surface Textures and DLC Coatings

Molecular Dynamics Simulation on Friction Process of Silicon-Doped Diamond-Like Carbon Films

Synergistic Friction-Reducing and Anti-Wear Behaviors of DLC on NCD Films Via In-Situ Synthesis by Fs Laser Ablation

Comparative Study on the Tribological Performance of HFCVD Diamond and DLC Films under Water Lubricating Condition

Microstructure and properties of diamond-like carbon deposited at room temperature

Self-luricated modification for silicon nitride ceramic ball surface

Nanofriction Behaviors Between Silicon-Doped Diamond-Like Carbon Films under Different Testing Conditions

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Extremely Enhanced Friction and Wear Performance of Hydrogen-Free DLC Film at Elevated Temperatures Via Si Doping

Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition

Friction and Wear Performance of Hydrogenated Diamond-Like Coatings with Non-Metal Element Complex Dopants Against Alumina in Ambient Air