Abstract:The poor high‐temperature tribological performance of diamond‐like carbon (DLC) films severely limits their applications. To address this issue, silicon (Si) doped DLC films with Si content ranging from 0 to 11.52 at.% were synthesized utilizing the plasma‐assisted reactive magnetron sputtering technique. The influence of Si incorporation on the microstructure and mechanical properties was meticulously investigated by Raman spectroscopy, scanning electron microscope (SEM), X‐ray photoelectron spectroscopy (XPS), nanoindentation, and scratch testing. To ascertain the tribological behavior of the Si‐DLC films under elevated temperature conditions, in situ high‐temperature tests were conducted, spanning temperatures from ambient to 500°C. The findings indicated that distinct lubrication mechanisms prevail for Si‐DLC films with varying Si content across different temperature domains. As the test temperature and Si content increased, the lubrication mechanism exhibited a gradual transitions from high‐temperature induced graphitization to a particle wear regime dominated by SiC and formed SiO2 abrasive phases. The comprehensive performance of the films peaked at a Si content of 4.72 at.%, suggesting an optimal composition for high‐temperature applications. It is postulated that the in‐depth investigation presented herein holds considerable value for the design and fabrication of DLC films intended for use in high‐temperature settings, potentially unlocking their full potential in such demanding environments.

Nanofriction Behaviors Between Silicon-Doped Diamond-Like Carbon Films under Different Testing Conditions

The Research on Friction and Wear Properties of Silicon Carbide and Silicon Nitride

Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions

Structural and tribological behaviours of silicon doped amorphous carbon films

Friction behavior of diamond-like carbon coatings with different sp 3 contents by atomistic-scale friction dynamics

Nanoscale friction of tetrahedral amorphous diamond-like carbon film after thermal annealing

The diagnostic utility of autoantibodies in adult and juvenile myositis

Probing the friction mechanism of diamond-like carbon films in aqueous environments based on molecular dynamics simulations

Probing the Frictional Properties of Sulfur-Doped Diamond-Like Carbon Films under High Vacuum by First-Principles Calculations

Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content

Genesis of Superlow Friction in Strengthening Si-DLC/PLC Nanostructured Multilayer Films for Robust Superlubricity at Ultrahigh Contact Stress.

Effects of Test Parameters on the Frictional Properties of Al/Diamond-like Carbon Core-shell Nanostructure-textured Surfaces

Nanoindentation-induced interface behavior between DLC film and monocrystalline silicon substrate at high temperature: A molecular dynamics simulation study

Effects of silicon doping on low-friction and high-hardness diamond-like carbon coating via filtered cathodic vacuum arc deposition

High temperature tribology behavior of silicon and nitrogen doped hydrogenated diamond-like carbon (DLC) coatings

Binary elements (Si, Mo) co-doping strategy enhanced the tribological performance of diamond-like carbon films

The High‐temperature Tribological Properties of Si‐DLC Films

Optimizing the Microstructure, Mechanical, and Tribological Properties of Si-DLC Coatings on NBR Rubber for Its Potential Applications

Effect of relative humidity on the tribological properties of hydrogenated diamond-like carbon films in a nitrogen environment

Friction Between Diamond-Like Carbon (DLC) Films—a Molecular Dynamics Study

Nanoindentation and scratching behaviors of diamond-like carbon films by coarse-grained molecular dynamics