Abstract:Magnesium aluminate spinel (MgAl2O4) ceramics are high-performance and carbon-free materials widely used in both military and civilian fields. However, it is usually challenging to densify during the solid-state sintering process. The excellent properties of some rare earth oxides have been proved to promote the densification of MgAl2O4 spinel ceramics. But the mechanism of promoting sintering is not clear. In the present work, MgAl2O4 spinel ceramics have been successfully fabricated by co-doping CeO2 and La2O3 via a single-stage solid-state reaction sintering. The effects of addition amounts of CeO2 and La2O3 on phase compositions, microstructures, sintering characteristics, cold compressive strength, and thermal shock resistance of as-prepared MgAl2O4 spinel ceramics were systematically investigated. The results show that by co-doping CeO2 and La2O3 can increase the defect concentration due to the lattice distortion. This could promote the movement of Al3+ and Mg2+ at high temperature, which is beneficial to the formation of more secondary MgAl2O4 spinel. t-ZrO2 with more Ce4+ filling between spinel grains could prevent the growth of grains and promote the densification, besides the new-formed LaAlO3 that was mainly distributed along the grain boundary of the MgAl2O4 phase, both of which were favorable for the formation of dense microstructure of MgAl2O4 spinel materials. At the same time, the formation of more secondary MgAl2O4 spinel and sintering densification also improve the mechanical properties of spinel ceramics. La3+ will segregate to the spinel grain boundary, preventing grain boundary movement and absorbing the main crack's fracture energy. With 3 wt% CeO2 and 3 wt% La2O3 co-doping, the bulk density of the sample increased from 3.02 g∙cm−3 to 3.55 g∙cm−3; the apparent porosity decreased from 12.21% to 9.97%; the cold compressive strength increased from 172.88 MPa to 189.54 MPa; and the residual strength retention ratio after thermal shock increased from 84.92% to 89.15%.

Li_2O·A_l2O_3·SiO_2 Composite Ceramics

Effect of BPO4-B2O3 Composite Additive on Crystallization and Sintering of Silica Ceramics

Preparation of Porous Spodumene/zircon Composite Ceramics and Its Thermal and Mechanical Properties

Effect of SiO2/Al2O3 ratio on sintering behavior, crystallization behavior and properties of diopside-anorthite glass-ceramics

Sol-gel preparation of ZrO2–Li2Si2O5 ceramics and their sintering properties

Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3

Preparation of Β-Spodumene-based Glass–ceramic Powders by Polyacrylamide Gel Process

Sintering Behaviors and Thermal Properties of Li2SiO3-based Ceramics for LTCC Applications

Influence of La2O3 on Properties of Li2O-Ai2O3-SiO2 System Glass-Ceramics

Improved Densification and Properties of Pressureless-Sintered Lithium Disilicate Glass-Ceramics

Preparation of Silicon Carbide/Graphite Composite Ceramic Sealing Material by Liquid Silicon Inifltration Processing

Fabrication and Properties of Li 2 O–Al 2 O 3 –sio 2 Glass/al 2 O 3 Composites for Low Temperature Co-Fired Ceramic Applications

Preparation of porous Al2O3 ceramics with enhanced properties by SLS using Al2O3 poly-hollow microspheres (PHMs) coated with CaSiO3 sintering additive

Sintering behavior and mechanical properties of sintered ceramics based on spodumene tailings

Effects of SiO<sub>2</sub> and ZrO<sub>2</sub> Additives on Microstructure and Properties of Al<sub>2</sub>O<sub>3</sub> Ceramic

Influence of Y2O3 on the Properties of Li2O-Al2O3-SiO2 System Glass-Ceramics by Polyacrylamide Gel Method

Fabrication and Properties of CaAl12O19-Al2O3 Composite Ceramics

Enhancement of Sintering and Mechanical Properties of Alumina-Rich Al2O3-MgO-CaO Refractory Composite by Doping La2O3

Effect of Different Forms of Silica on Sintering, Microstructure and Properties of Borosilicate Glass/al2o3 Composites

Processing, Microstructures and Mechanical Properties of Aqueous Gelcasted and Solid-State-Sintered Porous Sic Ceramics

Research on Low Temperature Sintering of ZnO-TiO_2 Ceramics Doped with Li_2CO_3-B_2O_3-V_2O_5