Colloidal Forming Process of Advanced Ceramics

Zhang Xuejun,Zheng Yongting,Han Jiecai

DOI: https://doi.org/10.3969/j.issn.1007-2330.2006.01.003

2006-01-01

Abstract:In this paper,various colloidal forming techniques including PIM,SC,GC,DCC,HAS and EPD are introduced.The theories,forming processes and characteristics of these techniques are compared.The key problems in ceramic forming process are also indicated.

What problem does this paper attempt to address?

Colloidal Forming Process of Ceramic Composites

Dong Xiuzhen,Zheng Zhanshen,Zhang Jiansheng,Wang Xiuwen

DOI: https://doi.org/10.16253/j.cnki.37-1226/tq.2007.04.007

2007-01-01

Abstract:In this paper,various colloidal forming techniques including SC,PIM,GC,DCC,TIF,HAS, EPD and are introduced.The theories,forming processes and characteristics of these techniques are com- pared.The key problems in ceramic forming process are also indicated.
RESEARCH PROGRESS OF NEW COLLOIDAL FORMING PROCESSES FOR ADVANCED CERAMICS

Yong HUANG,Liming ZHANG,Jinlong YANG,Zhipeng XIE,Chang'an WANG,Ruifeng Chen

DOI: https://doi.org/10.3321/j.issn:0454-5648.2007.02.001

2007-01-01

Abstract:The progress of new colloidal forming processes for high performance ceramics developed in Tsinghua University is reviewed. Several new techniques for preparing highly concentrated ceramic suspensions and high-quality green bodies are briefly described, and new ideas about ceramic colloidal forming are introduced. With these new techniques, high performance ceramic parts with high reliability and complex shapes can be mass prepared, by automation, at low cost and after the removal of defects in ceramic green bodies. This may pave the way for the industrialization of advanced ceramics in the near future.
New Colloidal Processing Techniques of Ceramic Powders

Shanyi Du

1999-01-01

Journal of Functional Biomaterials

Abstract:Ceramic powders colloidal processing techniques are used to fabricate large size,complicated shape ceramic parts of high reliability.The principles and the main technology of four new colloidal processing techniques:centrifugal casting,pressure filtration,gelcasting and direct coagulation casting are introduced in this paper.
Application of Silica Sol-Gel in Colloidal Forming of Ceramics

JS Luo,ZP Xie,JT Ma,Y Huang,YB Cheng

DOI: https://doi.org/10.3321/j.issn:1000-324x.2003.06.010

2003-01-01

Abstract:A novel colloidal forming processing of ceramics was investigated. The characteristic of silica sol-gel was applied successfully to colloidal forming of ceramics. The process is based on the casting of the slurry, containing powder and silica sol prepared by hydrolysis of tetraethoxysilane (TEOS) at pH 12.8. Then the mixture forms gelled parts through silica sol-gel. Ceramic green parts with strength of 5MPa can be obtained by this method. The forming process has advantages of low toxicity and high consolidation rate.
The Transformation Mechanism from Suspension to Green Body and the Development of Colloidal Forming

Juanli Yu,Jinlong Yang,Yong Huang

DOI: https://doi.org/10.1016/j.ceramint.2011.01.019

IF: 5.532

2011-01-01

Ceramics International

Abstract:Colloidal forming is a novel wet-processing way to prepare complex shaped ceramic parts with high reliability at low cost. In this article, the transformation mechanisms from suspension to green body and the development of colloidal forming are reviewed. The transformation from suspension to green body in colloidal forming is mainly dependent on the characteristics of suspension, and solidification is the key link in colloidal forming. Various colloidal forming methods are developed to produce ceramic parts, and these methods include slip casting, tape casting, direct coagulation casting, injection molding, gel-casting and so on. The study of defects during colloidal forming should be focused on the defects formation, inheritance and evolution during drying, de-binding and sintering processes. External free controllable technology of colloidal forming is an effective way to achieve ceramic fabrication industrialization, and stress-free colloidal forming is important for the future development of ceramic fabrication. (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
The New Methods And Techniques Based On Gel-Casting

Yong Huang,Jinlong Yang

DOI: https://doi.org/10.1007/978-3-642-12281-1_7

2011-01-01

Abstract:The reliability and the cost of the products, which are closely related to the preparation process, are the two major factors in the industrial production of high performance ceramics. The preparing process of ceramic powders, the forming and sintering process are thus becoming increasing important in the recent decades in the ceramic research field. As a precondition of materials design and realization of the high performance ceramic products of desired shapes, the ceramic forming process usually plays a crucial role in determining the reliability and the cost of the products. The traditional methods of producing the ceramic products have been widely used in the field of fine ceramics, but they do not meet the requirements of high performance ceramics. Therefore, enormous research efforts have been directed to devise new methods for the ceramic forming process. In this chapter, some new methods and techniques based on gel-casting are introduced, such as solid freeform fabrication (SFF) of alumina ceramic parts; freeform fabrication of aqueous alumina-acrylamide gel-casting suspensions; ceramics with special porous structures fabricated by freeze-gel-casting; solidifying concentrated Si3N4 suspensions for gel-casting by ultrasonic effects; laser machining technique of Al2O3 green ceramic, etc.. The forming mechanism is analyzed and the characteristics of the green and sintered bodies of ceramic parts using the new forming methods or new techniques are introduced.
Application Of New Colloidal Forming

Yong Huang,Jinlong Yang

DOI: https://doi.org/10.1007/978-981-15-1872-0_6

2011-01-01

Abstract:The colloidal forming process based on gel-casting was applied for preparing microbeads of ceramics, improving the breakdown strength of rutile capacitor, developing the thin-wall rutile tube for ozone generator, and producing the refractory nozzle of zirconia (ZrO2) and lead zirconate titanate (PZT). The microbeads of ceramics were used as grinding media, gel-pen-ball and healthcare product with far infrared function for human body. Owing to the low-cost associated with the production of the gel-beads as well as because of its superior properties, they have been widely used and marketed.When compared with the extrusion forming, the breakdown strength of rutile capacitor prepared by gel-casting was improved greatly. The rutile ceramics with high dielectric constant and high breakdown strength have been used in thin-wall tube of ozone generator.ZrO2 refractory nozzle prepared by gel-casting has a high melting point above 2680 degrees C and a good thermal shock resistance to withstand the temperature rising from the room temperature to 2200 degrees C in several seconds. Hence, it is considered as a suitable material for making the nozzle for precision casting of Cu-Cr molten alloy.When compared with die pressing, gel-casting can provide a more homogenous microstructure as well as better piezoelectric property of the PZT samples. By using the same sintering procedure, gelcast samples were observed to exhibit slightly stronger piezoelectric effects than the die pressed ones. This may be attributed to both density difference and pore size.
Colloidal injection moulding of ceramics induced by pressure

Liang Su,Jinlong Yang,Liguo Ma,ChunLei Dai,Yong Huang

2002-01-01

Rare Metal Materials and Engineering

Abstract:Gel-casting and injection moulding are two forming techniques thought to be the possible solution of the industrialization of high performance ceramics. However their several disadvantages limit their application and progress. Colloidal injection moulding of ceramics is a new ceramic forming technique which combines the advantages of gel-casting and injection moulding. High performance ceramics with complex shape and all kinds of cross section can be manufactured by the new technique with high reliability, high automation and low cost,which makes it possible to realize the industrialization of high performance ceramics.
RESEARCH PROGRESS OF POLYMER DERIVED ENGINEERING CERAMICS

Chen Lixin,Wang Rumin,Song Jiale,Chen Weiwei

DOI: https://doi.org/10.3969/j.issn.1000-2278.2006.03.015

2006-01-01

Journal of Ceramics

Abstract:Engineering ceramics in the system Si-O-C-N-B manufactured from preceramic silicon containing polymers gain in significance with increasing availability of advanced precursor materials such as poly(carbosilane), -(silazane), -(siloxane) or -(borosilazane). While high temperature resistant Si-C and Si-N ceramic fibers are already used to reinforce ceramic matrix composites (CMC) in air- and spacecraft structures, novel products such as coatings, tapes, foams, and complex shaped components for medium and low temperature applications in the fields of energy, environmental, transportation, and communication technologies become more important in the future. The synthesis of preceramic polymer, properties of polymer derived ceramic, methods of manufacturing and effects on polymer pyrolysis were reviewed.
Recent Developments in Gelcasting of Ceramics

Jinlong Yang,Juanli Yu,Yong Huang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2010.12.035

IF: 5.7

2011-01-01

Journal of the European Ceramic Society

Abstract:Gelcasting is a well-established colloidal processing method with a short forming time, high yields, high green capacity and low-cost machining, and has been used to prepare high-quality and complex-shaped dense/porous ceramic parts. In this article, we reviewed recent developments in gelcasting technology for ceramic preparation. For environmental pollution reduction during ceramic preparation by gelcasting, the development of low-toxic and nontoxic gelcasting systems is discussed. The occurrence and control of inner stress and surface-exfoliation in ceramic green bodies prepared by gelcasting are analyzed, and then some methods to control and eliminate the inner stress and surface-exfoliation in ceramic gelcast green bodies, especially for colloidal injection molding of ceramics (CIMC) are proposed. Finally, the applications of gelcasting for the fabrication of porous ceramics and complex-shaped ceramics (e.g., microbeads, rutile capacitor, thin-wall rutile tube, refractory nozzle) are summarized.
The Research and Development of Gel-Casting Process

LI Wei,HAN Min-fang

DOI: https://doi.org/10.3969/j.issn.1002-8935.2008.01.009

2008-01-01

Abstract:Gel-casting process is an advanced manufacturing technology for ceramic forming,which has provided an effective approach to prepare high performance ceramics with complicated shapes.The proce- dures and principles of gel-casting process are discussed in this paper,which includes the present research process,problems and applications.The tendency of this technology is forecasted at the same time.
Key Technique and Equipment on Colloidal Injection Moulding of High Reliability Ceramic

杨金龙,戴春雷,马天,马利国,黄勇

DOI: https://doi.org/10.3321/j.issn:1004-0609.2004.z1.037

2004-01-01

The Chinese Journal of Nonferrous Metals

Abstract:Colloidal injection moulding of ceramics (CIMC) is a new ceramic forming technique, which combines the advantages of gel-casting and injection moulding. It can inject aplastic slurry into the mould. The equipment of CIMC was designed and produced. The results show that all kinds of fectors which effect solidification of slurry is studied and then we can control solidification course. Internal stress of green body is also studied and large-size ceramic component can be got by adding moderator. So high performance ceramics with complex shape is manufactured by CIMC technique with high reliability, high automation and low cost.
Improved Gelcasting

Jt Ma,Zp Xie,Hz Miao,Y Huang,Yb Cheng

2003-01-01

American ceramic society bulletin

Abstract:Gelcasting is a ceramic colloidal forming approach that has received worldwide attention during the past 10 years. The gelcasting technique is based on traditional ceramic processing and polymer chemistry. The process uses a monomer solution that can be polymerized to form a strong, cross-linked polymer-solvent gel. Such a solution provides a low-viscosity vehicle for carrying the ceramic powder. This paper focuses on an attempt to resolve the surface-exfoliation problem using chemical methods.
Improving the Homogeneity and Reliability of Ceramic Parts with Complex Shapes by Pressure-Assisted Gel-Casting

Y Huang,LG Ma,HR Le,JL Yang

DOI: https://doi.org/10.1016/j.matlet.2004.08.015

IF: 3

2004-01-01

Materials Letters

Abstract:Forming process plays an important role in the homogeneity and reliability of advanced ceramic products. Inspired by the surprising observation of pressure-induced solidification in colloidal forming processes, the authors have developed a new ceramics forming process, colloidal injection moulding, with the potential of forming large ceramic parts of complex shapes such as engine turbines and biomedical implants. This process combines the advantages of the conventional injection moulding and gel-casting processes of ceramics. Not only the efficiency but also the homogeneity of the green body is greatly improved owing to the pressure-induced solidification. It is also found that the inner stress generated by non-uniform solidification due to temperature gradient is responsible for the origination of microstructural defects in green body during colloidal-forming processes. A new strategy is taken to reduce the inner stress by adjusting the stiffness of the green body using a moderator additive. Ceramic products with complex shape such as engine turbines have successfully been fabricated with reduced defects.
Technology and Equipment on Collide Injection Moulding of Ceramics

Jin Long Yang,Chun Lei Dai,Liang Su,Yong Huang

DOI: https://doi.org/10.4028/www.scientific.net/KEM.280-283.739

2007-01-01

Key Engineering Materials

Abstract:Colloidal injection moulding of ceramics (CIMC) is a new ceramic forming technique that combines the advantages of gelcasting and injection moulding. It can inject nonplastic slurry into the mould and solidification course of ceramics slurry can be controlled by both temperature and pressure. Quick mixing technique ensures that ceramic slurry will not be solidified before casting. The equipment of CIMC was designed and developed. High performance ceramic components with complex shape have been manufactured by this equipment.
Colloidal In-Situ Consolidation Forming of Al2O3 Ceramics Using Modified Starch

Ling Chen,Xian Liang Song,Jiandong Ye,Bing Li

DOI: https://doi.org/10.4028/www.scientific.net/kem.280-283.1027

2005-01-01

Key Engineering Materials

Abstract:The forming of Al2O3 ceramics was carried out by the colloidal in-situ consolidation using modified starch in this work. The effects of the modified starch content in the alumina suspensions on their rheological behavior, consolidation, microstructure and properties of the green bodies were investigated. The different shape and high relative density of ceramic green bodies were achieved by this method. The results indicated that the alumina suspensions with modified starch were easier to cast due to their low viscosity and high fluidity. After drying, the linear shrinkage of the green bodies was low, ranging between about 1.5% and 2.2% and their bulk density was higher than 57% of the theoretical density. The maximum bending strength of the dried green bodies reached to 8.2 MPa and the microstructure of the green bodies was uniform with a narrow unimodal distribution of pore size. It is concluded that the colloidal in-situ consolidation casting using modified starch can perform near-net shaping of ceramic components with high-performance and it is a potential forming technique for ceramics.
Dispersion Technique Application in Advanced Ceramic Manufacture

宁叔帆,陈维,刘斌,陈寿田

DOI: https://doi.org/10.3969/j.issn.1003-8337.2004.03.008

2004-01-01

Abstract:The dispersion mechanism of ceramic powders,especially that of nanometer class powders was discussed.The mechanism includes electrostatic stabilization,steric stabilization and electrosteric stabilization.This technology was applied widely to the research and synthesis of advanced ceramic.
Electrophoretic deposition and its application in ceramics processing

Jian-Ling Zhao,Xiao-Hui Wang,Jun-Jie Hao,Ren-Zheng Chen,Long-Tu Li

DOI: https://doi.org/10.3321/j.issn:1001-9731.2005.02.002

2005-01-01

Abstract:Features of electrophoretic deposition are introduced in this paper. The stability of ceramic suspensions, mechanisms of electrophoretic deposition and kinetic theory were discussed. Numerous applications of electrophoretic deposition were described, including production of coatings on solid substrates, porous ceramic structure, laminated and complex materials, films for solid oxide fuel cells and nanomaterials and nanostructures.
Recent advances on polymer precursors derived silicon-based ceramics:Fabrication, functionalization and high temperature application

Wei HAO,Xiaofeng ZHAO,Na NI,Yao YAO,Fangwei GUO

DOI: https://doi.org/10.3969/j.issn.1671-6906.2019.01.001

2019-01-01

Abstract:Recent advances in the fabrication,functionalization and high temperature oxidation behavior of PDCs and PDC composites for application in industrial field are summarized.Recent studies on the formation,performances and oxidation behavior of PDCs and porous PDCs for industrial application will also be highlighted.Additionally,modifying the composition of polymer precursors has expanded their applications and the formation and oxidation mechanisms of PDCs are critical for their preparation and applications.Recently,the research on polymer derived ceramics (PDCs) has been of significant interest because of their application in high temperature.Particularly,PDCs are widely used as high temperature structural materials and tribological materials,which can be due to their excellent thermal stability,oxidation and corrosion resistance,good wear resistance as well.Controlled PDCs fabrication plays an important role in their performances.Different PDCs systems are produced via diverse fabrication techniques,such as chemical vapor infiltration (CVI),melt-infiltration (MI),precursor infiltration and pyrolysis (PIP),tape casting,sol-gel and hot press sintering.Especially,making efforts to explore PDC coating for application in high temperature is significant.The fabrication and performances of SiC coating are provided.Finally,the challenges and perspectives for the future development of protective PDC coatings are also provided.
Fast Uniform Mixing & Controllable Colloidal Forming of Ceramics

Tian Ma,Yong Huang,Jin Long Yang,Li Ming Zhang

DOI: https://doi.org/10.4028/www.scientific.net/MSF.475-479.1305

2005-01-01

Materials Science Forum

Abstract:A process of fast uniform mixing & controllable colloidal forming of ceramics was invented to thoroughly avoid the crucial effect of temperature on colloidal forming of ceramics. The ceramic suspension was divided into two components A and B. The monomer was added into A, and the initiator was added into B. Under this condition, there were no reactions in separate A or B because of segregation of the monomer and the initiator. Both of the suspensions could keep good fluidity until they were mixed quickly and uniformly. The mixture would fast solidify under a determined pressure. The highly automatic equipment also had been developed for this process.

Colloidal Forming Process of Advanced Ceramics

Colloidal Forming Process of Ceramic Composites

RESEARCH PROGRESS OF NEW COLLOIDAL FORMING PROCESSES FOR ADVANCED CERAMICS

New Colloidal Processing Techniques of Ceramic Powders

Application of Silica Sol-Gel in Colloidal Forming of Ceramics

The Transformation Mechanism from Suspension to Green Body and the Development of Colloidal Forming

The New Methods And Techniques Based On Gel-Casting

Application Of New Colloidal Forming

Colloidal injection moulding of ceramics induced by pressure

RESEARCH PROGRESS OF POLYMER DERIVED ENGINEERING CERAMICS

Recent Developments in Gelcasting of Ceramics

The Research and Development of Gel-Casting Process

Key Technique and Equipment on Colloidal Injection Moulding of High Reliability Ceramic

Improved Gelcasting

Improving the Homogeneity and Reliability of Ceramic Parts with Complex Shapes by Pressure-Assisted Gel-Casting

Technology and Equipment on Collide Injection Moulding of Ceramics

Colloidal In-Situ Consolidation Forming of Al2O3 Ceramics Using Modified Starch

Dispersion Technique Application in Advanced Ceramic Manufacture

Electrophoretic deposition and its application in ceramics processing

Recent advances on polymer precursors derived silicon-based ceramics:Fabrication, functionalization and high temperature application

Fast Uniform Mixing & Controllable Colloidal Forming of Ceramics